NW
← Newsroom
Material ScienceDecember 13, 2023 · 2 min read

How does corrosion happen? New research examines process on atomic level

A transmission electron microscopy image of the oxidized aluminum surface shows that the passivating oxide film formed in water vapor consists of an inner amorphous aluminum oxide layer and an outer crystalline aluminum hydroxide layer. @ Provided
A transmission electron microscopy image of the oxidized aluminum surface shows that the passivating oxide film formed in water vapor consists of an inner amorphous aluminum oxide layer and an outer crystalline aluminum hydroxide layer. @ Provided

When water vapor meets metal, the resulting corrosion can lead to mechanical problems that harm a machine’s performance. Through a process called passivation, it also can form a thin inert layer that acts as a barrier against further deterioration.

Either way, the exact chemical reaction is not well understood on an atomic level, but that is changing thanks to a technique called environmental transmission electron microscopy (TEM), which allows researchers to directly view molecules interacting on the tiniest possible scale.


Professor Guangwen Zhou — a faculty member at Binghamton University’s Thomas J. Watson College of Engineering and Applied Science — has been probing the secrets of atomic reactions since joining the Department of Mechanical Engineering in 2007. Along with collaborators from the University of Pittsburgh and the Brookhaven National Laboratory, he has studied the structural and functional properties of metals and the process of making “green” steel.


Their latest research, “Atomistic mechanisms of water vapor induced surface passivation,” was published in November in the journal Science Advances.


In the paper, Zhou and his team introduced water vapor to clean aluminum samples and observed the surface reactions.


“This phenomenon is well-known because it happens in our daily lives,” he said. “But how do water molecules react with aluminum to form this passivation layer? If you look at the [research] literature, there’s not much work about how this happens at an atomic scale. If we want to use it for good, we must know, because then we will have some way to control it.”


They discovered something that had never been observed before: In addition to the aluminum hydroxide layer that formed on the surface, a second amorphous layer developed underneath it, which indicates there is a transport mechanism that diffuses oxygen into the substrate.


“Most corrosion studies focus on the growth of the passivation layer and how it slows down the corrosion process,” Zhou said. “To look at it from an atomic scale, we feel we can bridge the knowledge gap.”


The cost of repairing corrosion worldwide is estimated at $2.5 trillion a year, which is more than 3% of the global GDP — so developing better ways to manage oxidation would be an economic boon.


Additionally, understanding how a water molecule’s hydrogen and oxygen atoms break apart to interact with metals could lead to clean-energy solutions, which is why the U.S. Department of Energy funded this research and Zhou’s similar projects in the past.


“If you break water into oxygen and hydrogen, when you recombine it, it’s just water again,” he said. “It doesn’t have the contamination of fossil fuels, and it doesn’t produce carbon dioxide.”


Because of the clean-energy implications, the DOE regularly has renewed Zhou’s grant funding over the past 15 years.


“I greatly appreciate the long-term support for this research,” Zhou said. “It’s a very important issue for energy devices or energy systems, because you have a lot of metallic alloys that are used as structural material.”

Reference
Atomistic mechanisms of water vapor–induced surface passivation
Xiaobo Chen, Weitao Shan, Dongxiang Wu, Shyam Bharatkumar Patel, Na Cai, Chaoran Li, Shuonan Ye, Zhao Liu, Sooyeon Hwang, Dmitri N. Zakharov, Jorge Anibal Boscoboinik, Guofeng Wang, Guangwen Zhou

https://www.science.org/doi/10.1126/sciadv.adh5565

Binghamton University

More news

Material Science6 days ago · 3 min read

Saitama University research team tunes carbon quantum dot emission from UV to yellow-green using waste polyamide

Waste polyamide-derived CQDs show continuous photoluminescence tuning from 308 to 552 nm through sequential defect-state engineering, with optical transition energies decreasing from 4.32 to 2.50 eV. @Christian Ebere Enyoh from Saitama University Carbon quantum dots (CQDs) are fluorescent carbon nanomaterials with potential applications in sensing, optoelectronics, displays, anti-counterfeiting, and environmental technologies. Their optical properties can be adjusted by modifying the carbon...

Material ScienceOct 2 · 3 min read

Molecular arrangement controls crystal polarity and reverses photocurrent direction

The researchers used circularly polarized light at normal incidence and found that helicity-dependent photocurrents appeared perpendicular to the crystal’s polarization but vanished when measured parallel to it, supporting a bulk origin of CPGE. @Institute of Science Tokyo The circular photogalvanic effect (CPGE), a phenomenon that generates helicity-dependent photocurrents in noncentrosymmetric materials, can originate purely from a crystal's internal structure without contribution from the...

Material ScienceSep 30 · 3 min read

Controlling gold nanoparticle growth through peptide localization

Summary of gold nanoparticle growth programming in liposome based on localization of biomineralization peptide The position of biomineralization peptides within liposomes can influence how gold nanoparticles grow, reports a research team from Institute of Science Tokyo. Peptides localized at the membrane interface promote branched structures, while those confined to the liposome interior favor spherical nanoparticles. The findings offer a new strategy for controlling nanoscale reaction...