NW
← Newsroom
Material ScienceApril 11, 2024 · 2 min read

Uncovering how interfacial water structure can stabilize nanoparticle dispersion

Pacific Northwest National Laboratory

To investigate how stable nanoparticle suspensions form, researchers used facet engineering on hematite nanoparticles. Results indicated that the stability of nanoparticle suspensions can be controlled through morphology. @ Albert Russ | Shutterstock
To investigate how stable nanoparticle suspensions form, researchers used facet engineering on hematite nanoparticles. Results indicated that the stability of nanoparticle suspensions can be controlled through morphology. @ Albert Russ | Shutterstock

The stability of nanoparticle suspensions is governed by a complex mixture of factors. Avoiding aggregation over time often involves modifying the surface of particles, which can affect the overall properties of the system. Researchers explored differences in the behavior of hematite nanoparticles with different facets exposed to water. They found that (104) hematite nanoparticles were highly stable and remained dispersed across multiple solution conditions, in contrast to (001) and (116) hematite. Calculations showed that water forms a tightly bound layer on the (104) surface, favoring particle dispersion over aggregation.


The Impact


Nanoparticle applications often rely on their high surface area to volume ratio. This requires that a large portion of the nanoparticle surface area remain accessible in solution, a challenge that usually requires surface modification to maintain particle stability and dispersity over time. This work demonstrates that controlling the faceting of nanoparticles can be an effective way to maintain particle dispersity without the introduction of surface modifying additives.


Summary


Nanoparticle aggregation in solution controls both surface reactivity and the overall function of the materials. Complete dispersion usually requires adding sorbents that impart a net repulsive interaction between particles. Facet engineering offers an alternative approach to producing monodisperse suspensions simply based on facet-specific interactions with the solvent molecules. Researchers measured the dispersion/aggregation of three morphologies of hematite (α-Fe2O3) nanoparticles in water using ex situ electron microscopy and in situ small-angle x-ray scattering. The results showed a unique tendency of (104) hematite nanoparticles to maintain a monodisperse state across a wide range of solution conditions not observed in similarly sized (001)- and (116)-dominated particles. Density functional theory calculations reveal an inert, densely hydrogen-bonded first water layer on the (104) facet that favors interparticle dispersion. These data validate the notion that nanoparticle dispersions can be controlled through morphology for specific solvents, which may help in nanoparticle applications that rely on having highly accessible interfacial area in stable suspensions.

Reference
Facet-dependent dispersion and aggregation of aqueous hematite nanoparticles

Jianbin Zhou, Duo Song, Sebastian T. Mergelsberg, Yining Wang, Narendra M. Adhikari, Nabajit Lahiri, Yatong Zhao, Ping Chen, Zheming Wang, Xin Zhang, Kevin M. Rosso

https://www.science.org/doi/10.1126/sciadv.adi7494

More news

Material Science6 days ago · 3 min read

Saitama University research team tunes carbon quantum dot emission from UV to yellow-green using waste polyamide

Waste polyamide-derived CQDs show continuous photoluminescence tuning from 308 to 552 nm through sequential defect-state engineering, with optical transition energies decreasing from 4.32 to 2.50 eV. @Christian Ebere Enyoh from Saitama University Carbon quantum dots (CQDs) are fluorescent carbon nanomaterials with potential applications in sensing, optoelectronics, displays, anti-counterfeiting, and environmental technologies. Their optical properties can be adjusted by modifying the carbon...

Material ScienceOct 2 · 3 min read

Molecular arrangement controls crystal polarity and reverses photocurrent direction

The researchers used circularly polarized light at normal incidence and found that helicity-dependent photocurrents appeared perpendicular to the crystal’s polarization but vanished when measured parallel to it, supporting a bulk origin of CPGE. @Institute of Science Tokyo The circular photogalvanic effect (CPGE), a phenomenon that generates helicity-dependent photocurrents in noncentrosymmetric materials, can originate purely from a crystal's internal structure without contribution from the...

Material ScienceSep 30 · 3 min read

Controlling gold nanoparticle growth through peptide localization

Summary of gold nanoparticle growth programming in liposome based on localization of biomineralization peptide The position of biomineralization peptides within liposomes can influence how gold nanoparticles grow, reports a research team from Institute of Science Tokyo. Peptides localized at the membrane interface promote branched structures, while those confined to the liposome interior favor spherical nanoparticles. The findings offer a new strategy for controlling nanoscale reaction...