By Micro-Hybrid Electronic GmbH
6-axis measuring system for rail traffic Measure acceleration and rotation in three dimensions - with the new ImuSENS sensor, you get both the raw data as well as the calculated inclination angle. The ImuSENS Inertial Measurement Unit with a micromechanical spring-mass system provides continuous data on acceleration and rotation rate in all three spatial directions.. The sensor is then able to calculate its tilt angle from the raw data obtained. Not only the determined tilt angle is significant for the rail vehicle industry, but also the raw data of acceleration and angular velocity can be analysed in a meaningful way by our customers. Using the ImuSENS, it is possible to detect the position of the wagon or to detect driving in curves. Rotational movements as well as as horizontal and vertical accelerations are reliably detected by the ImuSENS sensor while the vehicle is in motion. The sensor complies with the applicable standards for fire protection, electromagnetic compatibility and environmental influences in rail vehicles. The angular signal of the Inertial Measurement Unit compensates interference caused by sudden movements, jolts and vibrations, so that external influences are minimized. ImuSENS features the following characteristics: - Acceleration measurement range: ± 2 g (x, y, z) - Rotation rate measuring range: ± 500 °/s (x, y, z) - Inclination measuring range - Pitch (Longitudinal) ± 180 ° - Roll (Lateral) ± 85 ° - Tilt angle x / Tilt angle y ± 90 ° - Flexible zero point adjustment - Configuration of sensor parameters - High operating temperature range -40...+85°C - Polyamide housing (IP68) The embedded CANopen digital interfaces (CiA DS-301, CiA DSP410) allow the sensor to be easily integrated into an existing bus network and the sensor parameters to be easily set. The sensor is mounted on the moving/accelerated measuring object.
Our sensor modules, consisting of highly developed inertial and gas sensors, offer precise and reliable solutions for a wide range of measurement and analysis requirements in demanding applications.
CATEGORY
The gas sensors from Micro-Hybrid offer precise and reliable measurement solutions for NDIR gas analysis and impress with their durability and adaptability.
CATEGORY
Convenient solution for the demand of small volumes offered by Micro-Sensor. Within an average 30 years’ service life of a piece of rolling stock safety requirements for rail traffic are changing. Operators must upgrade their fleets with latest sensor technology to ensure safety standards. For this so-called retrofit, often only a small number of sensors is required. Micro-Hybrid offers a convenient solution for this case and also for prototype construction or field tests. They deliver acceleration and rotation rate sensors in small series starting, e.g. 50 pieces. Micro-Sensor also develops reliable and durable sensor solutions for OEM projects with small quantities and act as your international expert in railway applications. With more than 20 years of experience and established technologies, Micro-Sensor is a specialist for inertial sensors in the regular service and develops sensors to be used in applications in harsh environments like heat, sand and a lot more. The production processes allow manufacturing of even small series. The sensors are produced modularly and adapt all necessary steps to the individual customer requirements. This decisive advantage is enabled by the deep value chain (PCB assembly, packaging, calibration) and the broad technological expertise in the corporate group of Micro-Hybrid and Micro-Epsilon.
CATEGORY
