Our next-generation finishing solution, the DefenseTech MRLS Portable Finishing Laser 1030 (DTMF-1030), delivers exceptional speed and a superior finish. The advanced dual-axis technology tackles uneven and intricate surfaces with ease. The DTMF-1030’s portability and compact size make it perfect for on-site cleaning, finishing, and surface treatment. It empowers professionals with an eco-friendly alternative to traditional industrial surface preparation methods. Handheld Dual Axis Surface Finishing The DTMF-1030 is a Class IV laser per safety standards and is designed and tested with safety in mind. is a finishing class handheld laser cleaning system that provides a non-abrasive cleaning process that is safer, easier to use and more eco-friendly than legacy methods. It minimizes the need for chemicals and pollutants making the technology resistant to increased regulations from OSHA, EPA and other regulatory agencies. Say Goodbye to Corrosion Problems Corrosion damages billions of dollars of military assets every year. The DefenseTech product line is the most cost effective, efficient and safe surface treatment solution for removing rust on missiles and preserving military equipment. Laser surface treatment can be used to remove corrosion from metal surfaces on missiles and other equipment without damaging the underlying material. Safe Easy To Use Eco-Friendly Cost-Effective Key Features - Dual-axis laser beam for optimal coverage of uneven and intricate surfaces - Effective degreasing and decontamination capabilities - Efficient rust and corrosion removal - Versatile surface preparation functionality - Portable design for easy maneuverability in various work environments Safety Features The DefenseTech Handheld Laser cleaning machines are Class IV laser instruments that incorporate additional safety measures for easy and safe operation across all industries and work environments. Emergency Stop | Key Switch | Interlocks | Reset | Emission Indicator - Surface Conditioning - Corrosion Removal - Decontamination - Coating Removal - Pre-Adhesion Treatment - Pre-Weld Preparation - Post-Weld Treatment - Degreasing - Surface Preparation - Surface Texturing - Injection Mold Cleaning - Oxide Removal - Anodization Removal - Aluminum - CFRP - Steel - Silicon - Copper - Plastics - Brass - Thermoplastics - Titanium - Composites - Nickel - Concrete - Chrome - Ceramics - Cast Iron - Marble - Carbide & More - Strip Rate Per Hour: Up to 24 ft² - Laser Type: Fiber - Scanner: Dual Axis - Head Cable Length: 9.8 – 16.4 ft (3 – 5 m) - Size W x H x D: 25 x 41.3 x 23.4 in (635 x 1049 x 594 mm) - Temperature: 41 – 104 °F (5 – 40 °C) - Operational Voltage: 110V | 60Hz | 15A - Cooling: Air - Safety Class: IV DefenseTech MRLS Portable Finishing Laser 1030 With its ability to quickly and effectively degrease, decontaminate, and remove rust and corrosion, the DTMF-1030 streamlines maintenance processes and enhances overall productivity. Its portability and versatility make it an invaluable tool for in-field operations, offering a high-quality finish while maintaining ease of use. Surface Texturing & Conditioning Our handheld laser system has a head unit that is connected to the main machine via cable, is mobile, and can be used anywhere, and with a Dual-Axis laser our system has an optical pattern that is shaped like a box. It will clean the part faster and can handle complex shapes better than a single axis laser. Laser Finishing, Laser Cleaning & Surface Prep The DefenseTech MRLS Portable Finishing Laser 1030 (DTMF-1030) is a cutting-edge surface preparation tool that revolutionizes degreasing, decontamination, and rust removal processes. Utilizing advanced dual-axis laser technology, this compact and mobile device offers precision and efficiency in tackling complex surface treatments Revolutionizing MRO and Corrosion Control in the Defense Ecosystem The DTMF-1020’s dual-axis technology ensures thorough coverage, allowing it to detect and treat details that might escape traditional cleaning methods. This innovative approach makes it ideal for professionals seeking a powerful, eco-friendly alternative to conventional surface preparation techniques in industrial settings.
Missile Laser Rust Inhibitor DTMF-1025 The DefenseTech DTMF 1025 Missile Laser Rust Inhibitor is a portable handheld laser designed specifically for cleaning missiles and munitions. This advanced laser system prevents corrosion, strips away coatings, and enhances the surface finish of various materials. This laser can be easily integrated into missile maintenance processes, whether in the missile field or on a production line. Handheld Dual Axis Surface Finishing The DTMF-1025 Missile Laser Rust Inhibitor helps prolong the lifespan and performance of missiles in the most extreme conditions. Fonon Technologies' DefenseTech cleaning equipment provides a safe and effective solution for all branches of the military to maintain and operate vehicles, aircraft, ships, equipment, and more. Say Goodbye to Missile Jams & Corrosion Problems Corrosion damages billions of dollars of military assets every year. The DefenseTech product line is the most cost-effective, efficient, and safe surface treatment solution for removing rust from missiles and preserving military equipment. Operational Cost Savings: With the DTMF-1025-MLRI, you eliminate the need for consumables and minimize equipment wear, optimizing your maintenance budget for critical military operations. Expedited Cleaning Process: Reduce downtime and maintain peak equipment readiness, allowing your military unit to stay prepared and responsive to emerging threats. Safe Easy To Use Eco-Friendly Cost-Effective Key Features Advanced Rust and Corrosion Control: The DefenseTech MLRI Finishing Laser is designed to eradicate rust and corrosion from missile surfaces with precision and accuracy. By doing so, it extends the lifespan of your equipment while optimizing its overall performance. Safety Features Enhanced Safety: This system employs a non-abrasive, non-contact laser cleaning technique, eliminating the necessity for harsh chemicals. This approach not only ensures the safety of personnel but also minimizes the environmental impact. Emergency Stop | Key Switch | Interlocks | Reset | Emission Indicator - Surface Conditioning - Corrosion Removal - Decontamination - Coating Removal - Pre-Adhesion Treatment - Pre-Weld Preparation - Post-Weld Treatment - Degreasing - Surface Preparation - Surface Texturing - Injection Mold Cleaning - Oxide Removal - Anodization Removal - Aluminum - CFRP - Steel - Silicon - Copper - Plastics - Brass - Thermoplastics - Titanium - Composites - Nickel - Concrete - Chrome - Ceramics - Cast Iron - Marble - Carbide & More - Strip Rate Per Hour: Up to 24 ft² - Laser Type: Fiber - Scanner: Dual Axis - Head Cable Length: 9.8 – 16.4 ft (3 – 5 m) - Size W x H x D: 25 x 41.3 x 23.4 in (635 x 1049 x 594 mm) - Temperature: 41 – 104 °F (5 – 40 °C) - Operational Voltage: 110V | 60Hz | 15A - Cooling: Air - Safety Class: IV Portability and Versatility With its ability to quickly and effectively degrease, decontaminate, and remove rust and corrosion, the DTMF-1025 streamlines maintenance processes and enhances overall productivity. Its portability and versatility make it an invaluable tool for in-field operations, offering a high-quality finish while maintaining ease of use. Ideal for On and Off-site Maintenance This system's compact, portable design makes it ideal for both on and off-site maintenance tasks. With this DefenseTech Laser Cleaning System at your disposal, you can rest assured knowing that readiness is never compromised, no matter where you are.
CATEGORY
DTWD-7010 The BlackStar is a wafer dicing system powered by the proprietary Fantom Width Laser Dicing Technology (FWLDT) developed to produce a clean, near-zero kerf without micro-cracks, fragmentation, or chipping. It is engineered using short-pulse laser technology for precise and waste-less die singulation. It involves minimal heat to separate brittle, high-value semiconductor materials like silicon, greatly improving die yield and saving time and labor. Wafer Dicing with Laser Technology The DefenseTech BlackStar 7010 is powered by proprietary laser wafer dicing technology that helps maximize die yield per wafer. Safe Easy To Use Eco-Friendly Cost-Effective Key Features - FWLDT Proprietary Technology - Minimal Heat-Affected Zone (HAZ) - Capable of Dicing Wafers Up to 12 in - Generates No Chips or Debris - Compatible With Various Wafer Materials - High Scribing Speed – Up to 200 mm/s - CDRH Class I Laser Safety Enclosure - Touchscreen Interface Safety Features The DTWD-7010 BlackStar is a Class I laser instrument that incorporates additional safety measures for easy and safe operation across all work environments. Safe-Viewing Windows | Safety Labels | Interlocking Device | Emission Indication | Emergency Stop Button Applications - 2D UDI/UID Barcoding - QR Code Marking - Sequential Serial Numbers - Alphanumeric Marking - Lot and Dates Codes - Logos and Schematics - Medical/Automotive Coding - Anodized Ablation - IC Chip Package Marking - Paint Ablation & Removal - Part Numbering - Surface Annealing/Etching - 3D Engraving/Deep Engraving - Complex Graphics Materials - Aluminum - Rubber & Silicon - Synthesized Plastics - Nylon/Valox - Titanium and Nickel - Multi-Coated Materials - Polycarbonate - Coated Plastic - Galvanized Metals - Polypropylene - Carbide/PVC - Painted Metal Alloys - Glass - Chrome & Cast Iron - Ceramics Specifications - Power Output: 20 Watt - Laser Safety Class: Class IV - Wavelength: 1064 nm - Operating Mode: Q-switch - Cable Length: 3m - Marking Area: 2” x 2” - User Interface: USB Port Supporting Windows 11/FiberScan C3 LT Why Choose Fonon Technologies We stand out as industry leaders and innovators, offering laser systems designed for government organizations, military branches, and defense applications. Our selection of advanced technologies provides cost-effective, safe, and reliable solutions to streamline MRO processes. With increased mobility, smart safety features, and compliance with stringent industry regulations, the next-generation DefenseTech series empowers users to maintain critical equipment with minimal downtime and maximum efficiency. Intelligent Laser Solutions Intuitively designed defense technology that is operator-friendly and easy to integrate. Military Focused Systems We deliver laser solutions tailored for defense and military applications, ensuring world-class performance. Enhanced Operations Fonon Technologies provides solutions that facilitate operational excellence and modernize processes.
CATEGORY
Fonon Technologies’ Bulk-To-Shape (BTS™) Transformation Technology, currently under development, aligns with the U.S. Department of War’s strategy to adopt and integrate additive manufacturing to ramp up rapid prototyping and end-use parts production. BTS™ is the result of proprietary intellectual property with the latest developments in 3D metal printing, reinforced by a family of patents from the Lawrence Livermore National Security Lab. This innovative approach represents a paradigm shift in metal printing systems, enabling highly precise production and rapid turnaround times that reduce costs and lead times for hundreds of types of parts and components. Most importantly, our technology employs an application-centered approach focusing on the end-user’s specific requirements, which will enhance the operational efficiency of end users. A key feature of BTS™ is its production of uniform powder density, which results in improved consistency, enhanced material properties, and reduced operational costs. By controlling powder quality at the foundational level, BTS™ ensures repeatable, reliable outcomes in additive manufacturing—eliminating variability that often leads to part failure or costly rework. This level of precision directly supports the Department of War’s push for rapid, mission-ready solutions. As the U.S. military continues to prioritize readiness and technological dominance, BTS™ enables faster deployment of critical components, ensuring warfighters’ needs are met swiftly and effectively without compromising quality or performance. Another core advantage of BTS™ is its design flexibility. Unlike traditional additive manufacturing, BTS™ allows end users to produce highly complex, application-specific parts that meet precise operational demands. From lightweight, high-strength geometries to intricate internal features, BTS™ empowers maintainers and engineers to design components that directly match the needs of the field—whether for aerospace platforms, ground vehicles, or weapons systems. This tailored approach eliminates the limitations of off-the-shelf solutions, ensuring that parts are not only functional but optimized for the unique stresses and use cases they encounter in real-world military environments. Additionally, BTS™ accelerates development cycles and streamlines logistics. Faster production times, reduced lead times, and less resource-intensive processes allow for rapid prototyping and on-demand part replacement, minimizing downtime in maintenance and overhaul operations. The system also promotes sustainable manufacturing practices. By maximizing powder recyclability and minimizing material waste, BTS™ aligns with Environmental, Social, and Governance (ESG) principles—reducing the carbon footprint while maintaining operational efficiency. In today’s defense landscape, where both mission readiness and sustainability are priorities, BTS™ delivers on both fronts. While first-generation 3D metal printing has transformed the prototyping process by shrinking cycle times and reducing development costs, our new bulk-to-shape technology provides a cost-effective method for developing application-specific 3D metal-printing tools. The technology combines proprietary processes with an understanding of the molecular behavior of materials under transitional temperatures, and intellectual property related to developing metal laser-sintering equipment. The result is the ability to bridge the gap between prototyping and full production. Fonon Technologies’ BTS™ technology represents a transformative step in additive manufacturing, and when fully commercialized, will enable the DOD to optimize existing part designs with unparalleled precision, efficiency and consistency. BTS™ exemplifies Fonon Technologies’ expanding portfolio of next generation technologies supported by our patents, licenses, and proprietary intellectual property.By pioneering our cutting-edge 3D metal printing technology, we aim to aid the DOD in “modernizing the Nation’s defense and increasing materiel readiness”.
CATEGORY
