Model CRT-810 Controller - Modular

By XENON Corporation

Z-1000 MODULAR CONTROLLER FOR OEM APPLICATIONS The ability to implement remote Programmable Logic Control (PLC) for timed sterilization permits ease of integration into small and large scale manufacturing systems. XENON's compact, modular controller provides a pulse forming network (PFN) and pulse flashing control via a user supplied interface such as a PLC. All I/O is optically isolated to minimize interference from noise signals. High voltage and +24 VDC power is supplied from the modular high voltage power supply. Lamp housing control is provided using high voltage and analog control cables connected to the controller. An optional dual lamp capability, incorporating InterWeave™ technology, is available. Internal fan provides cooling. Max lamp pulse rate, 3 pulses/sec, and pulse electrical energy, 505 J/pulse, are factory set. Controller - modular Description Controller: Lamp power, Pulse Forming Network, PLC I/O PLC I/O Interface Optically isolated user interface: 37-pin I/O connector Pulse trigger: ON/OFF HV monitor: Overload, over voltage, over temperature HVPS +15 VDC & +24 VDC: Monitor Lamp Housing: Trigger enable and interlock monitor (cover in place) Lamp flash: Confirm HVPS Input Voltage: High Voltage and +24 VDC HVPS control: 15-pin connector Electrical output to lamp Pulse Width: 360 μs (factory set) Pulse Rate: 3 pulses/sec, max (factory set) Electrical Energy: 505 Joules/pulse; 1,516 Joules/sec (factory set) Mains Power AC Input: 1-phase 200-240 Vrms, 50/60 Hz, 30 amps max Warm-up time: 1-minute Outline Dimensions (H x W x L) Controller: 16.8 x 30.5 x 48.2 cm (6.63 in x 12.0 in x 19.0 in) Environment Temperature - operating: 0°C - 40°C (32°F -104°F) Temperature - storage: -40 to 85 oC Relative Humidity: 10% - 80% (non-condensing) Weight: 12.8 kg (28 lbs.) Specifications: Model CRT-810 Controller