Model RC-847 Controller - Benchtop

By XENON Corporation

Controller - Benchtop Description Controller: Lamp power, PFN 1, PLC & front panel operator controls Operator Controls AC Power: ON/OFF High Voltage: ON/OFF Lamp Select: None, Lamp A or Lamp B Pulse Mode Select: Manual, Single Pulse, Continuous Programmable Timer: 1 to 999 seconds in 1 sec intervals Trigger Select: Start/Stop PLC Control Optically isolated user interface: 37-pin I/O connector Electrical output to lamp Pulse Width: 360 μs (factory set) Pulse Rate: 3 pulses/sec, max (factory set) Electrical Energy: 505 Joules/pulse; 1,516 Joules/sec (factory set) Mains AC power AC Input: 1-phase 200-240 Vrms, 50/60 Hz, 20 amps max Warm-up time: 1-minute Mains line power: 2500 W, maximum Mains power cord: 2.4 meters (8 ft.) Outline Dimensions (H x W x L) Controller: 22.6 x 48.0 x 70.6 cm (8.8 in x 18.9 in x 27.8 in) Environment Temperature - operating: 0 - 40°C (32 -104°F) Temperature - storage: -40 to 85 oC Relative Humidity: 10 - 80% (non-condensing) Weight: 39 kg (87 lbs.) Z-1000 BENCHTOP CONTROLLER XENON's benchtop controller provides all pulse power and operator control to deliver high energy pulses to the flashlamp. The system offers single, cycled or continuous pulse flashing operation, using either the timer on the front panel or by a user supplied interface such as a PLC. The continuous mode provides a sequential train of light pulses at a 3-pulse/sec rate. In the single mode, the operator can manually flash the lamp each time a front-panel switch is operated. Pulse duration (360 μs) and max pulse rate (3 pulses/sec) are factory set. Front panel status indicator lights provide status of AC power, High Voltage and lamp flash. Specifications: Model RC-847 Controller