By Nano-C
Product Code C60-C6PA-X01 CAS No: N/A Identified Uses: Laboratory Chemicals. Research and Development Hazardous Components Name and Registration Numbers: C60-C6-PA, CAS No: N/A Concentration: >98% Classification: Skin Irrit. 2; Eye Irrit. 2A; STOT SE 3; H315, H319, H335 Appearance/Color: Brown powder Molecular Weight: N/A Melting point: not determined Solubility in water: not determined Solubility in organic solvents: toluene, o-dichlorobenzene, o-xylene Partition coefficient n-octanol/water: Not determined Odor: odorless GHS Classification in accordance with 29 CFR 1910 (OSHA HCS) Skin Irritation (Category 2), H315 Eye Irritation (Category 2A), H319 Specific Target Organ toxicity-single exposure (Category 3), Respiratory System, H335 Signal word: Warning Hazard Statement(s) H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. Precautionary Statement(s) P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. P264 Wash skin thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P280 Wear eye protection/ face protection. P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P304 + P340 + P312 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/ physician if you feel unwell. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P332 + P313 If skin irritation occurs: Get medical advice/attention. P337 + P313 If eye irritation persists: Get medical advice/ attention. P362 Take off contaminated clothing and wash before reuse. P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/ container to an approved waste disposal plant. Hazards not otherwise classified (HNOC) or not covered by GHS – None Handling and Storage: Provide appropriate exhaust ventilation at places where dust is formed. Keep container tightly closed in a dry and well-ventilated place. Store under inert gas. Light sensitive. Storage class (TRGS 510): 13: Non-Combustible Solids Disposal: Offer surplus and non-recyclable solutions to a licensed disposal company. Dispose of contaminated packaging as unused product. Transport Information (DOT (US), IMDG, IATA): Not dangerous goods US Regulatory Information: This substance is distributed by Nano-C, Inc. solely for processing and use by recipients under the Toxic Substances Control Act (TSCA) R&D Exemption in accordance with the regulations at 40 CFR 720.36. Commercial use is prohibited.
Invisicon™ 3000-8950 SWCNT Ink is an additive-free, slot-die coatable SWCNT ink formulation targeting high-quality optical applications Product Specifications Deposition Methods: Roll-to-roll (R2R) Carrier: Mixed alcohol Viscosity (@ 25°C and 20 s⁻¹): 110 cP Optical Density (OD): OD20 at 555 nm Additives/surfactants: Non-electroactive, polymeric additive. Handling & Storage Diluent: Only use Nano-C 8000 series diluent. Please inquire for availability. Drying Temp (°C): Dry wet film at 80 °C or as high as the substrate can tolerate up to 200 °C Handling: - Shake vigorously immediately before coating - Probe sonication recommended immediately before coating for best results. Contact for conditions. - Any dilution should only be attempted with Nano-C 8000 series diluent. Storage: Store unused ink at room temperature. from $130.00 Limit 2 per order
CATEGORY
Invisicon™ 3000-3500 SWCNT Ink is an ultrapure, additive-free, spray-coatable SWCNT ink formulation targeting high-quality optical applications Product Specifications Deposition Methods: Spray coating Carrier: Alcohol and water Viscosity (@ 25°C and 20 s⁻¹): <5 cP Optical Density (OD): OD 5 at 550 nm Additives/surfactants: N/A Handling & Storage - Bath or probe sonication should be performed immediately prior to spray coating - Recommended bath sonication: 10 min bath sonication for 50 ml ink - Recommended probe sonication conditions: Perform all probe sonication in an open beaker immersed in an ice bath. Probe sonication time: approximately 0.25 s/ml ink. Power setting: 60% amplitude based on 750 W instrument and 1” diameter probe Storage Store unused ink at room temperature or refrigerated.
CATEGORY
FD23 is a functionalized fullerene developed by and proprietary to Nano-C. This functionalized fullerene was developed to enhance thermal stability in organic solar devices, increasing device lifetime and improving power conversion efficiency under light-soaking. FD23 can be paired with commercially available p-type polymers used in organic electronic devices. Physical & Chemical Properties Chemical Name FD23 Purity (HPLC) 99.5% Molecular Weight (g/mol) 928.30 Solubility Soluble in organic solvents: toluene, o-dichlorobenzene, o-xylene, mesitylene Electronic Properties Orbital Energy HOMO -5.9 to -6.0 eV LUMO -4.3 eV Application Electron acceptors, n-type semiconductors, interface layers Download MSDS
CATEGORY
Nano-C produces single-walled carbon nanotubes (SWCNT) using a proprietary, scalable, industrial-grade approach that sets us apart from lab-scale and CVD-based suppliers. Nano-C has customized its processes to optimize nanotube characteristics based on application requirements. The downstream processing for these nanotubes includes purification, functionalization, separation and formulation. The key to making usable products for the market is being able to disperse these materials successfully in a range of host systems in masterbatches or coat-ready ink. Nano-C offers a range of formulations based on customer requirements and applications.
CATEGORY
