With the CHI680D Amp Booster, the current can be measured up to 2 A. The CHI680D is compatible with our model 600D/E/F instrument series. You can stack the CHI600D/E/F and the CHI680D together. The CHI680D can also be connected to the model 700D/E/F series, but it will only work for the primary channel. Compared with the previous CHI680 generation, the CHI680D adds circuit to reduce power dissipation to the output power amplifier to better protect the power amplifier. When the Amp Booster is connected, cell control signals such as purge, knock, and stir will be disabled. The Amp Booster will also allow low current measurements. You may need to use a Faraday cage to eliminate line frequency noise when the scan rate is above 50 mV/s. The frequency response of the Amp Booster is somewhat lower than that of the CHI600D/E/F. For high speed experiments, the Amp Booster should be disconnected. Dimension: 12.5”(W) x 11”(D) x 4.75”(H) Weight:17 lb.
Non-Aqueous Ag/Ag+ Reference Electrode w/ porous Teflon Tip. For the CHI112, Ag+ solution (typically 10 mM) should be prepared with the supporting electrolyte and AgNO3 (not included). This solution is then filled into the reference electrode compartment using a syringe (not included). The instructions will come with the components.
CATEGORY
Electrode leads for model number xxx (where xxx = 600, 710B, etc.)
CATEGORY
Electrode Polishing Kit. The CHI120 electrode polishing kit contains 1 bottle of 1.0 micron Alpha alumina powder, 1 bottle of 0.3 micron Alpha alumina powder, 3 bottles of 0.05 micron Gamma alumina powder, 2 glass plates for polishing pads, 5 pieces of 73 mm diameter 1200 grit Carbimet disks (grey in color), 5 pieces of 73 mm diameter Mastertex polishing pads (white in color), and 10 pieces of 73 mm diameter Microcloth polishing pads (brown in color).
CATEGORY
