By NanoIntegris Technologies, Inc.
These SuperPure Tubes single-wall carbon nanotubes are purified to values of 95-98% (nanotube content measured via optically, thermogravimetrically, and by elemental analysis). PureTubes offer metal content lower than 5% and SuperPureTubes offer less than 2% metal content. These are some of the world's highest purity un-sorted nanotubes, as sourced from the arc-discharge processes and has been utilized in numerous research efforts. The product is offered in solution or thick film form. Specifications: Parameter PureTubes SuperPureTubes G/D ratio from Raman > 30 > 30 Metal content from TGA < 4% 1% Length range from AFM 0.1-4 μm 0.1-4 μm Carbon impurities <5% <5% Diameter range 1-1.7 nm 1-1.7 nm Itkis index from Optical Absorbance > 0.2 > 0.2 Prices: 1301 Super PureTubes Solution $200 25 1302 Super PureTubes Thick Film $275 25 1303 PureTubes Solution $75 25 1304 PureTubes Powder $125 25 1305 P2 Powder $350 1,000 1306 AP Powder $135 3,000 1307 COOH-Functionalized P2 $1,000 1,000 1308 COOH-Functionalized AP $750 1,000 Significant discounts are available for large size orders. Please contact our sales team for a special quote. Did you know? Photonic devices are widely used for optical communications, spectroscopy, and precision surgery (e.g. medical lasing). Materials which exhibit strong nonlinear electro-optical behaviors are required for most photonic applications. Ideally, these materials should exhibit fast response times, absorb over a broad wavelength range, and exhibit low optical loss. Nanotubes are one of a handful of materials in existence which satisfy these property requirements.
NanoIntegris Launches higher-performing Ultra High-Purity Single-Walled Nanotubes: IsoSol-S100 TM Raymor-NanoIntegris breaks a new barrier by becoming the world's first company to commercialize ultra high-purity, polymer-wrapped, semiconducting carbon nanotubes dispersed in organic solvents: IsoSol-S100 TM. This innovative product, offered in powder or solution form, is the first semiconducting single-walled carbon nanotube material on the market with purities exceeding 99.9%. IsoSol-S100 has the following properties: - Can be readily dispersed in a variety of organic solvents such as toluene and xylenes. - Polymer/nanotube ratio can be adjusted to less than a factor of four with nanotube concentrations 10X higher than our aqueous dispersions. - Displays a 50% greater shelf life, as compared to aqueous surfactant solutions. - Allows the production of printed transistors with current ON/OFF ratios on the order to 1.8×10 6 and mobilities on the order of 30 cm 2/(Vs) - Is perfectly-suited for commercial ink jet and aerosol jet printing. IsoSol-100 is based on an RF-plasma grown carbon nanotube source material supplied by Raymor Nanotech at industrial scale. The IsoSol-S100 solutions can be produced at far higher production capacity than density-gradient centrifugation (DGU) or chromatography-based production techniques and at a lower cost. The highly graphitized starting material and low sonication intensity utilized during the extraction process minimizes damage to the nanotubes, allowing the material to exhibit higher crystallinity and longer average lengths of 2µm, as compared to aqueous surfactant-wrapped nanotubes. The patent-pending polymer-wrapping technique used by Raymor-NanoIntegris was developed by the National Research Council Canada within the Printable Electronics Program. It takes advantage of the selective affinity of conjugated polymers for semiconducting carbon nanotubes and surmounts the capacity bottleneck presented by competing technologies. The IsoSol-S100 material is now available to the academic community and to leading companies working in the field of printed transistors, nanotube-based electronics, and sensors.
CATEGORY
Raw | <35% wt% | 0.8 – 1.2 | ~100 – 1,000 nm We currently offer our HiPco Raw nanotube products in two forms: Fluffy Powder and Wet Cake. Due to safety concerns with handling the extremely low-density raw material, the HiPco Raw product is provided as a wet cake for orders of greater than 5g unless otherwise requested. The wet cake is roughly 10wt% nanotubes. The remaining mass is a mixture of 10% ethanol and 90% water, which can be easily removed by thermal or centrifugal treatment. (e.g. 10.70g of wet cake will be provided for a 1g HiPco Raw SWNT order. Raw Fluffy Powder $615 Raw Wet Cake $680 Raw Dense Powder $700 Individual SWNT Diameter i~0.8 – 1.2 nm Individual SWNT Length ii~400 – 700 nm Color Black, Dark Grey Morphology Dry fibrous powder Raman G/D Ratio (532nm)Raw: 35 Catalyst Content<20 wt% (5 Atom%) as Fe Carbon Purity80 wt% (95 atom%) Carbon as SWCNT (TGA)65wt% Crystallinity (Raman Analysis)High Raman G/D ratio Average: ~25 Highest 95@532nm Excitation
CATEGORY
Purified | <15% wt% | 0.8 – 1.2 | ~100 – 1,000 nm All HiPco Purified and Super Purified products are offered as a dry, granular powder. Purified $900 Individual SWNT Diameter i~0.8 – 1.2 nm Individual SWNT Length ii~400 – 700 nm Color Black, Dark Grey Morphology Dry fibrous powder Raman G/D Ratio (532nm)Purified: 95 Catalyst Content<20 wt% (5 Atom%) as Fe Carbon Purity80 wt% (95 atom%) Carbon as SWCNT (TGA)65wt% Crystallinity (Raman Analysis)High Raman G/D ratio Average: ~25 Highest 95@532nm Excitation
CATEGORY
Super Purified | <5% wt% | 0.8 – 1.2 | ~100 – 1,000 nm All HiPco Purified and Super Purified products are offered as a dry, granular powder. Super Purified $2240 Individual SWNT Diameter i~0.8 – 1.2 nm Individual SWNT Length ii~400 – 700 nm Color Black, Dark Grey Morphology Dry fibrous powder Catalyst Content<20 wt% (5 Atom%) as Fe Carbon Purity80 wt% (95 atom%) Carbon as SWCNT (TGA)65wt% Crystallinity (Raman Analysis)High Raman G/D ratio Average: ~25 Highest 95@532nm Excitation Product Applications The use of NanoIntegris’ HiPco within scientific research has proven quite extensive. This small-diameter SWCNT material has found to be a valuable component for applications such as cancer therapy, battery electrode conductivity, electric field enhancement, thin film transistor creation, and gas sensors.
CATEGORY
