
With MBN’s proprietary MechanoMade® powders, various light alloys are available Nanostructured Aluminum Metal Matrix Composites reinforced with Al₂O₃-Al₄C₃ phases, achieving YTS of 560 MPa MBN offers a complete end-to-end prototyping pathway for Al-based alloys and composites, starting from mechanical alloying to fully formed semi-finished components. Materials options include Aluminum matrix composites (Al-MMCs) reinforced with SiC for wear resistance, B₄C for lightweight armour and neutron absorption or AlN for thermal conductivity and stability The Prototyping Process includes Powder Production- Nanostructured powders synthesised by mechanical alloying (Mechanomade®) and Forming Options such as hot isostatic Pressing, followed by extrusion, or direct extrusion of pre-heated green compacts This integrated approach enables rapid development of advanced lightweight materials tailored for aerospace, defence, and automotive applications.

Cobalt-Free Cermet for Wear-Resistant Applications Ti-WC cermet is an advanced composite developed by MBN ensuring an homogeneous microstructure with strong carbide-matrix interfacial bonding. By replacing cobalt binder with titanium matrix, this eco-friendly cermet material retains the hardness of conventional WC based systems delivering both wear performance and environmental sustainability. Ti-WC composite powders are processable through cold spray coating deposition or powder metallurgy consolidation into dense bulk components. Using Cold Spray technology, the material produces thick, compact wear-resistant coatings with excellent coating-substrate adhesion. Spark Plasma Sintering (SPS) consolidation enables production of near-full density components with outstanding mechanical strength and fracture toughness. Applications include lightweight automotive racing components (magnesium alloy protection), extrusion dies, rolling mill tooling, forming dies, and high-wear industrial equipment where abrasion resistance is critical performance factors. COMPOSITION Ti 23% – WC: 77% PROPERTIES OF CGS COATING As-sprayed hardness 800-1000 HV Post-heat treatment hardness1000 HV Coating thickness capability 0.5-2 mm Cobalt-Free Cermet for Wear-Resistant Applications
CATEGORY

MBN pure nickel powder is specifically engineered for Cold Gas Spray applications, offering high deposition efficiency, dense coatings, and excellent process stability. Its rounded morphology ensure smooth flow, reduced material waste, and consistent spray performance. The powder's fine-grained structure promotes strong adhesion and minimal porosity without requiring post-processing. Key Benefits: - High productivity - Dense, uniform coatings - Low material waste - Optimized for CGS Systems Ideal for dense bond layers with oxidation resistance and functional metallic coatings in aerospace and industrial repair applications.
CATEGORY

Magnetic Nanoparticles for Cancer Theranostics & Hyperthermia Treatment SelfMag® magnetic nanoparticles are doped ferrite nanoparticles for biomedical applications developed by MBN’s mechano-chemical synthesis process, integrating cancer therapy and diagnostic imaging in a single theranostic nanoplatform. The key feature of SelMag® nanoparticle is the tunable Curie temperature, which enables precise thermal dose control and intrinsic patient safety in magnetic hyperthermia therapy, with transition temperatures adjustable between 40 and 250 °C. The self-regulated heating prevents tissue overheating during alternating magnetic field (AMF) treatment. Surface functionalization options (glucose, PEG, chitosan) ensure colloidal stability in physiological media, controlled protein corona formation, and tailored biodistri bution and tumor targeting. Validated on MDA-MB-231 breast cancer cells, SelfMag® nanoparticles induce selective cancer cell necrosis under alternating magnetic fields with minimal off-target cytotoxicity to healthy tissues. Beyond magnetic hyperthermia applications, these multifunctional nanoparticles serve as temperature-sensitive MRI contrast agents and magnetic particle imaging (MPI) tracers with exceptional sensitivity. Available as aqueous dispersions or propan-2-ol suspensions, SelfMag® nanoparticles provide a patent-pending nanomedicine solution for precision cancer treatment and molecular imaging. Biomedical Applications: Magnetic hyperthermia therapy, MRI contrast enhancement, magnetic particle imaging, drug delivery carriers, cancer theranostics, thermal ablation, cell tracking. Key Advantages: Self-regulating temperature control, high heating efficiency, biocompatible composition, multimodal imaging capability, customizable surface chemistry. PROPERTIES Particle size 50-120 nm (hydrodynamic diameter) SAR values 20-30 W/g at clinical AMF conditions Tunable Curie temperature range 40-250 °C COMPOSITION Fe₂O₃ matrix 28-30% – MgO 32-36% – TiO₂ 26-30% – Other stabilizing phases 12-16% Surface coatings Glucose, PEG, chitosan (custom options available) Dispersion media Water, propan-2-ol REE-Free Gap Magnets Materials for Sustainable Motor Applications As part of the IT-funded FutureMag project, MBN has developed an innovative class of rare-earth-free permanent magnets based on the (Fe,Co)₂(P,Si) magnetic alloy system. These “gap magnets” are engineered to bridge the performance and cost gap between ferrite magnets and rare-earth-based NdFeB magnets, offering sustainable magnet solutions without critical raw material dependencies. The REE-free magnetic powder is produced via MBN’s proprietary Mechanomade®, followed by controlled annealing to crystallize the ferromagnetic hexagonal phase. Post-processing optimization ensures particle size distribution and powder morphology suitable for powder metallurgy consolidation techniques and net-shape manufacturing. Consolidation into sintered permanent magnets is achieved through current-assisted hot pressing, Spark Plasma Sintering (SPS), or cold compaction with sintering, yielding near-net-shape magnetic components with retained crystallographic texture and optimized magnetic properties including coercivity, remanence, and energy product. (Fe,Co)₂(P,Si) permanent magnets target applications in compact electric motors, linear actuators, electromagnetic devices, and sensor systems, delivering significantly improved magnetic performance over ceramic ferrites at moderate production costs. Their rare-earth-free composition and powder metallurgy compatibility make them ideal for sustainable magnet manufacturing in e-mobility, electric vehicle traction motors, industrial automation, and renewable energy systems. COMPOSITION Fe – Co 13% – P 14% – Si 8% PROPERTIES Curie temperature 290 °C Anisotropy field 2 T Saturation magnetization 110 emu/g
CATEGORY

NbC Cermets Alternative carbides for Wear-Resistant Coatings The Nb C-FeCr and NbC-NiCr powders are alternative cermets developed for thermal spray and featuring in-situ synthesized Niobium Carbide (NbC) finely dispersed in metallic matrix alloys. The mechanical alloying process ensures superior carbide-matrix bonding compared to conventional agglomerated cermet powders. NbC-FeCr cermet coatings deliver exceptional hardness, outstanding wear resistance at elevated temperatures —optimized for HVOF (High Velocity Oxygen Fuel) and HVAF (High Velocity Air Fuel) thermal spray processes. This eco-friendly cermet delivers wear resistant performance between traditional WC-CoCr and Cr₃C₂-NiCr systems, with superior high-temperature sliding wear resistance. The NbC-NiCr variants exhibit exceptional corrosion resistance in aggressive environments, outperforming standard cermet references in electrochemical corrosion testing, making them ideal for applications requiring combined wear and corrosion protection across broad temperature ranges. Applications: Industrial rolls, valve components, marine equipment, petrochemical processing, aerospace tooling. PROPERTIES Maximum Hardness 1100 HV Typical Operating temperature 600°C Density ~7.5 g/cm³ Particle size distribution (HVOF) +10–45 µm Other PSD are available on request
CATEGORY