
Fe2O3 nanoparticles for magnetic and catalytic applications Product Number TN-IRONIIIO CAS Number 1309-37-1 Purity>=99.5% Particle Size 20-40 nm Packing NOS Stock In Stock (70 units) Hematite (alpha-Fe2O3) nanoparticles with controlled morphology and narrow size distribution. Suitable for magnetic applications, pigments, catalysts, and environmental remediation.

TENI-GRIP Ultra P anti-slip treatment, formulated for vitrified, porcelain (PGVT) and granite floors. Creates invisible micro-texture, targets a wet SCOF between 0.5 and 0.6 or above, preserves gloss. 250 mL covers 25-30 sq ft. Product Number TN-GRIP-ULTRAP Packing 250 ml Stock In Stock (199 units) TENI-GRIP ULTRA P Anti-slip protection engineered for vitrified, porcelain & granite floors Ultra P is the specialist formulation for hard, dense mineral surfaces — vitrified tiles, full-body porcelain, PGVT (glazed vitrified porcelain tiles) and polished or honed natural granite. It creates a dense field of invisible suction micro-pores that engage the moment the floor gets wet. Wet SCOF between 0.5 and 0.6 or above – measured per NFSI B101.1-2022 Invisible treatment Preserves gloss & finish 250 mL covers 25-30 sq ft How it works Unlike sticky films or abrasive grip tapes that peel, yellow and trap dirt, TENI-GRIP works at the microscopic level. The solution is spread evenly across the floor as a uniform wet sheet, where it briefly conditions the polished surface into invisibly small traction pores. Instead of pooling into a slippery puddle, water now spreads into a thin, continuous film. When you step on it, the microscopic pores give the water somewhere to be displaced: it is drawn into the pores and held away from your shoe sole, allowing your foot to make firm, direct contact with the floor and gain grip rather than slip. On an untreated floor, there are no pores to absorb the water, so it stays trapped beneath the shoe as a slippery layer — these micropores change that, displacing the water and helping your feet find secure footing — so wet traction improves dramatically while the floor keeps its original look, gloss and finish. Key benefits Invisible micro-texture No change to appearance, gloss or finish. Nothing visible changes after treatment. Wet SCOF between 0.5 and 0.6 or above Measured using a method referenced in NFSI B101.1-2022, before and after treatment. Long-lasting grip Long-Lasting Traction — Zero Peeling: - Residential Floors: Up to 3–5 years of reliable wet-traction safety (requires deep cleaning every 2 years). - Commercial Facilities: 1–2 years under continuous heavy pedestrian traffic (annual or bi-annual deep maintenance cycle). Indicative service life is application- and traffic-dependent. Current product guidance subject to substrate, pedestrian traffic, cleaning, maintenance and wear conditions. These figures are indicative and are not a performance warranty. Gloss preserving Gloss-preserving kinetic buffers protect the polish on expensive porcelain and granite. Low-hazard once cured Once neutralized and cured, the floor can return to normal use and cleaning (see SDS for details). Hygienic & odour-free No sticky residue and no trapped dirt — your usual cleaning routine stays the same. Order Ultra P when your floor is Vitrified, porcelain or granite: - Full-body / double-charge vitrified tiles - Porcelain tiles (PGVT / glazed vitrified porcelain) - Polished or honed natural granite Is your floor standard ceramic? Ultra P is tuned for dense vitrified and stone surfaces. Standard glazed ceramic tiles need the gentler TENI-GRIP Ultra C formulation. Product TENI-GRIP Ultra P Suitable flooring Vitrified, porcelain (PGVT) & granite Wet SCOF target between 0.5 and 0.6 or above (measured per NFSI B101.1-2022) Application rate 100 mL per sq m (uniform wet sheet) Dwell window 1-2 min full-body vitrified; 3-4 min PGVT / granite Coverage 250 mL covers approx. 25-30 sq ft Neutralization TENI Friction Stop, then rinse with water Professional service On-site application with documented SCOF results Application at a glance 1. Pre-wash: Strip factory wax with TENI-Prewash, rinse and dry. 2. Apply: Spread a continuous wet sheet at 100 mL/sq m. 3. Dwell: Hold for the timed window; keep the film wet. 4. Neutralize: TENI Friction Stop, then rinse and squeegee clean. Full step-by-step guidance, the calibrated 10 x 10 cm micro-patch pilot test and the substrate dwell-time chart are in the DIY Kit & Application Guide. Choose by your floor tile. Have ceramic tiles instead of porcelain or granite? Order TENI-GRIP Ultra C (use the variant selector above). Marble and soft natural stone should use TENI-GRIP Supra; never apply Ultra chemistry to calcite marble or glass. Applications Vitrified, porcelain (incl. PGVT) and polished/honed granite - lobbies, restaurants, malls, hospitals, pool decks and other wet areas. TENI-GRIP Ultra P: For vitrified, porcelain (PGVT) & granite. Dwell 1–4 minutes.
CATEGORY

High-purity ZnO nanoparticles for research and industrial applications Product Number TN-ZINCOXID CAS Number 1314-13-2 Purity=99.9% Particle Size 20-30 nm Packing 100 g Stock In Stock (100 units) Zinc Oxide (ZnO) nanoparticles with exceptional purity and uniform particle size distribution. Suitable for coatings, electronics, cosmetics, and research applications. Characterized by TEM, XRD, and DLS for complete quality assurance.
CATEGORY

Alpha-Al2O3 nanoparticles for advanced ceramics and coatings Product Number TN-ALUMINIU CAS Number 1344-28-1 Purity=99.9% Particle Size 20-50 nm Packing 500 ml Stock In Stock (80 units) High-purity alpha aluminium oxide nanoparticles ideal for thermal management, ceramics, and protective coatings. Excellent hardness and thermal stability for demanding industrial applications.
CATEGORY

Industrial-grade MWCNT for composites and coatings Product Number TN-MULTIWAL CAS Number 308068-56-6 Purity=95% Particle Size Diameter: 10-20 nm Packing NOS Stock In Stock (50 units) Multi-walled carbon nanotubes offering excellent reinforcement for polymer composites, conductive coatings, and battery electrodes. Cost-effective solution for large-scale applications.
CATEGORY