Additional products include customized high-density arrays and couplers, in-fiber linear and circular polarizers, high temperature sensors, evanescent couplers, fiber lasers and assemblies thereof. Chiral has also provided many R&D services, including packaging of photonic integrated circuits (PICs).
The PSC611 is an all-glass, pump-signal combiner that offers: - Information loss of 0.5 dB or less on all channels - Polarization extinction ratio (PER) greater than 23 dB maintained through the signal channel - Flexible and scalable design, based on Chiral Photonics' proprietary pitch reducing optical fiber array (PROFA) technology, with independent control of channel spacing, mode field diameter, and channel count. Speak to us about your custom or OEM needs as this design facilitates use at 1060 nm as well as the shown 1550 nm configuration. The design can also be modified to suit your specific fiber needs: PARAMETER UNIT SPECIFICATION Signal Channel - Input Input Fiber Insertion Loss Return Loss PER 2 s dB dB dB SMF28 or PANDA 1550 1 <= 0.4 40 23 Pump Channels Number of Channels 1 Pump Fiber 1 Operating Wavelength Insertion Loss s s nm dB 6 105/125 pm core / cladding, NA: 0.12 800-1600 < 0.3 Dual Clad Fiber Output Fiber 1 Operating Wavelength 1 s nm 6/125/245 µm core / clad / clad2, Er:Yb-doped, NA: 0.18 / 0.46 1530-1625 Mechanical Specification Package Type 3 N C P None Connectorized Packaged (typical: 150 x 6 x 6 mm) - Speak to us about other wavelength requirements as this design can accommodate both Er (1550 nm) and Yb (1060 nm) bands. Please let us know your input, output and pump fiber requirements and we will work with you to adapt an existing design or optimize a new design to your combining needs. - Polarization extinction ratio, if PM fiber is used. - Standard package types that have been provided. Water-cooled package have also been provided. Please speak to us about your custom package and splicing needs.
CATEGORY
The PSC611-HP is a high power, all-glass, pump-signal combiner that offers: - Information loss of 0.5 dB or less on all channels - Compatibility optimized for the following fibers: - LMA 20/400 (NA: 0.065/0.46) double clad signal fiber - 200/240 (NA:0.22) pump fibers - Flexible and scalable design, based on Chiral Photonics' proprietary pitch reducing optical fiber array (PROFA) technology, with independent control of channel spacing, mode field diameter, and channel count. Speak to us about your custom or OEM needs. The combiner can, for example, be supplied pre-spliced to an active double-clad fiber of choice. The design can also be modified to suit your specific fiber needs. PARAMETER UNIT SPECIFICATION Signal Channel - Input Input Fiber Insertion Loss s dB LMA 20/400 (NA: 0.065/0.46) Dual Clad Fiber <= 0.4 Pump Channels Number of Channels Pump Fiber Operating Wavelength Insertion Loss s s nm dB 6 200/240 (NA: 0.22) 800-1600 < 0.2 Dual Clad Fiber Output Fiber Operating Wavelength s nm LMA 20/400 (NA: 0.065/0.46) Dual Clad Fiber 1060 - 1600 Mechanical Specification Package Type 1 P Packaged (typical: 150 x 6 x 6 mm) - Speak to us about other wavelength requirements as this design can accommodate both Er (1550 nm) and Yb (1060 nm) bands. Please let us know your input, output and pump fiber requirements and we will work with you to adapt an existing design or optimize a new design to your combining needs. - Polarization extinction ratio, if PM fiber is used. - Standard package types that have been provided. Water-cooled package have also been provided. Please speak to us about your custom package and splicing needs.
CATEGORY
Chiral Photonics is at the forefront of this technological advancement, providing MCF fanouts and related components that facilitate the seamless integration of these innovations into existing networks. Our submarine-qualified fanouts are currently in production, and we also offer a range of complementary components, including attenuators, wavelength division multiplexers, and other MCF amplifier components and assemblies. Our MCF fanouts and associated products are instrumental in supporting the evolution of submarine cable technology and ensuring its compatibility with current infrastructure.
CATEGORY
Pitch Reducing Optical Fiber Array Pitch Reducing Optical Fiber Arrays, or PROFAs, are compact, precisely positioned arrays of, typically singlemode, fibers. PROFAs have standard fiber pigtails but their monolithic glass endface provides a high-density array with typical channel spacing of 37 to 50 µm, positioned with submicron accuracy, that retain the mode field size of the pigtail fiber. PROFA -61-Channel Array. Micrograph of coupling endface is shown to the right, displaying all 61 channels in the hexagonal array The above description describes our standard products which have primarily been optimized for 1550 nm. However, Chiral Photonics, Inc. (CPI) has worked on many custom products. PROFAs are a powerful tool that offer broadband operation, have been optimized for other wavelengths, mode field sizes, lattice configurations, channel counts and other application needs. More specifically but not exhaustively: Wavelength 1550 and 725 nm are wavelengths where subcomponents have been optimized. Devices have been fabricated for applications from 400 to 2000 nm. Also, devices are relatively broadband. Non-optimized subcomponents can be used at other wavelengths with an often acceptable insertion loss penalty. Of course, development of optimized subcomponents is always an option we are happy to discuss. Spot Size Conversion PROFAs can be designed to maintain, reduce or enlarge the mode field diameter (MFD) at the PROFA endface as compared to the MFD in the fiber pigtails. At 1550 nm, typical output MFDs are 10 or 6 µm. However, other needs have been accommodated. For example, high fill-factor devices (mode field diameters approaching channel spacing) have been provided for free-space communications applications. Please note that the choice of endface MFD must consider the crosstalk needs of the application. MFDs approaching the channel spacing will result in higher crosstalk. Single channel PROFAs have also been provided to serve as spot size converters. Please speak to us about your specific needs. Channel Spacing and Alternate Lattice Shapes Optimal channel spacing for the triangular or hexagonal pattern shown is typically 37 µm. However, a spacing of 35-50 µm can be accommodated. Smaller channel spacing can also be accommodated, but crosstalk requirements must be considered. Submicron channel positioning precision is somewhat a function of the tapering draw ratio, so larger channel spacing may compromise positioning error from the ‘perfect’ grid somewhat. Alternate lattice shapes, such as square, circular, and linear placements of the channels, have been provided. Please speak to us about your specific needs. Fiber Pigtail Jacketing and Connectors PROFAs can be provided with jacketing over the bare fiber, to add protection, and connectors on the fiber pigtails, to provide pluggability. Chiral has provided assemblies incorporating other components, armored and ruggedized cabling and connectors ranging from FC/UPC, LC/APC to MTP and specialty mil-spec connectors. Speak to us about your specific needs. PROFA packaging and holding There is typically a metal package that encloses the base (untapered portion) of the PROFA for protection and handling of the PROFA and its pigtails. This minimal ( M ) metal package can be gently clamped to position the PROFA. Holding the PROFA’s glass portions is strongly discouraged. This package’s diameter can also be expanded, referred to as a holder-compatible ( HC ) package, to enable simpler mounting of the PROFA in standard mounts. The holder-compatible package can be extended to protect more of the tapered endface. Leaving the endface extended beyond the package is recommended to enable endface cleaning, similar to a fiber endface. However, a cover is added to holder-compatible packages to protect the endface when in transit or not in use. The holder-compatible package is designed to simplify holding in standard 6.35 mm (0.25″) diameter fiber chuck holders. See technical notes below. Polarization Polarization maintaining PROFAs have been provided with PM pigtails for a variety of wavelengths. Polarization extinction ratios are limited to 10-15 dB for relatively small channel counts, less than 12 channels. Larger channel count PM PROFAs are possible but may require non-recurring engineering fees, depending on the application needs and the number of channels required. PM PROFAs will also need specification of the orientation of the slow axis at the endface and of the fiber pigtail connector keys, if applicable. See technical notes below. Custom PROFAs with circularly polarizing channels, incorporating circular polarizer technology [link to circular polarizer], have also been fabricated to provide less alignment-sensitive output. Endface Polish The endface polish can be flat or angled to reduce back-reflections. In addition to specifying the endface angle, it may be necessary to specify the polish angle relative to the channels. See technical notes below. Testing Testing and the data provided for each PROFA will somewhat depend on the application and PROFA specifics. Please discuss with us what testing is needed for your application needs. Some parameter values for a typical 1550 nm PROFA are as follows. Please speak to us about your needs. Custom PROFAs have been supplied to address many specific application needs: Parameter Unit PROFA Central wavelength (λc) 1 nm 1550 Mode field diameter 2 µm 6 or 10 Bandwidth nm 50 Insertion loss 3 dB < 1 Optical return loss 4 dB < -40 Crosstalk dB < -35 Number of channels 5 1-91 Channel spacing 6 µm 35-50 Typical average channel deviation 7 µm ≤ 0.1 x λc Operating temperature C -40 to +85 Storage temperature C -70 to +85 Pigtails 8 1 m long, coated SM fibers Package type 9 M or HC - Other wavelengths available upon request. - Measured, typically in the near-field, as 1/e 2 Other mode field sizes available upon request. - Measured from fiber pigtail to device tip, per channel. - Intrinsic to device. - Typical array is hexagonal. Other lattice arrays have been accommodated. Larger channel counts can also be accommodated. A single channel is obviously not an array but single channel PROFAs have been used to provide spot size conversion. - Other channel spacing sizes can also be accommodated. - Measured displacement of PROFA channel from its “perfect array” channel position. Will be dependent on array size and pitch. As indicated, and similar to fiber, the target is typically to have the position within 10% of the mode field diameter. So, for example, if the MFD = 10 µm, the position of each channel is targeted to be within 1 µm of the perfect position. - Other pigtails, connectorization and other pigtail lengths are available upon request. - Please speak to us about your custom package, splicing and assembly needs. Ordering Information When purchasing a PROFA, please use the guide below to determine the best configuration for your application. Please do not hesitate to contact us with any questions. Exemplary configurations Below are examples of different configurations. Configuration 1 PROFA-H-07/35-SM-01-1550-LC/APC-00-00-MN-C: - PROFA, hexagonal array, 7 channels, 35 µm spacing - SMF28 fiber pigtails, 1 meter long - 1550 nm central wavelength - LC/APC connectors, unjacketed, flat endface polish - Minimal package Configuration 2 PROFA-S-04/50-SM-02-1550-FC/UPC-FT-00-HC-C: - PROFA, square array, 4 channels, 50 µm spacing - SMF28 fiber pigtails, 2 meters long - 1550 nm central wavelength - FC/UPC connectors, jacketed, flat endface polish - Holder-compatible package Configuration 3 PROFA-S-04/50-SM-02-1550-FC/UPC-FT-00-HC-C: - PROFA, square lattice, 4 channels, 50 μm spacing - SMF28 fiber pigtails, 2 meter long with furcation tubes - 1550 nm central wavelength - FC/UPC connectors, flat endface polish - Holder-compatible package - Custom Configuration 4 PROFA-L-06/37-PM-01-1550-FC/APC-00-00-MN-C: - PROFA, linear array, 6 channels, 37 µm spacing - PM 1550 fiber pigtails, 1 meter long - 1550 nm central wavelength - FC/APC connectors, no furcation tubes, flat endface polish - Minimal package - Custom Configuration 5 PROFA-L-04/35-SM-01-780-00-00-08-HC-C: - PROFA, linear array, 4 channels, 35 µm spacing - SMF28 fiber pigtails, 1 meter long - 780 nm central wavelength - No connectors, no furcation tube, 8 º angle endface polish - Holder-compatible package Technical Notes Cleaning and Care: PROFAs can be cleaned with alcohol much like a bare fiber tip. Care must be taken to avoid breaking or chipping the tip. Any damage to the tip will likely cause the device to be unusable and unrepairable. Holder-Compatible Package: The PROFA1D is available with a holder-compatible package design to simplify holding in a standard 6.35 mm (0.25″) diameter fiber chuck holder. Fiber chuck holding products which hold a 0.25″ (6.35 mm) fiber can be used to hold the PROFA1D with the holder compatible package. This would include some Newport 561 series accessories, like the 561-FC or 561-GM or similar products from Thorlabs, for example. There are, of course, other comparable choices as well. Endface Polish: If an angle polish for the PROFA endface is specified, the orientation of that polish may need to be specified. Polarization: For PM devices, it is important to specify the polarization orientation at the PROFA endface and the connector key orientation, as relevant, relative to the slow axis of the pigtail fibers. Usually the connector key is aligned with the slow axis of the connector. Photonic Integrated Circuit (PIC) Alignment, Coupling and Packaging: PROFAs are sometimes used to probe PICs or to optically couple to a PIC as part of PIC packaging. In probing, standard rigid PROFAs have typically been used. However, in packaging, when attaching to a die, CPI has developed a PROFA with a flexible tip. This flexibility enables the PROFA-die interface to be mechanically decoupled from the package. Please speak to us about your specific application needs and to obtain relevant publications. While PROFAs have been demonstrated for PIC packaging, more scalable high density optical coupling is being developed using multicore fiber. A PROFA is aligned similarly to other micro-optic devices, e.g. similar to working with lensed fibers. Using the PROFA, the most efficient and stable coupling to a waveguide is achieved by butt coupling. Often customers will use index matching liquids or adhesives but this is not required. Rough Alignment: Initial rough rotational alignment of the PROFA is easiest done in the far field using a 1550 nm laser and projecting onto an infrared visualizer. One can use this to achieve rough alignment of the device inside a chuck, for example, to the device’s slow/long axis (shorter axis in the far-field). The device is then ready to be aligned finely to, for example, a waveguide. Fine Alignment: A five-axis stage with at least +/-0.1 micron resolution is typically used for XYZ motion as well as angular alignment. The needed stage resolution will depend on the mode field sizes one is working with and the application. A general rule of thumb is 10% of the mode field diameter, or 0.2 μm for a standard PROFA1D. For an example of one customer’s measured stage resolution requirements of 0.3 microns, please see C. R. Doerr et. al., “Tapered Dual-Core Fiber for Efficient and Robust Coupling to InP Photonic Integrated Circuits.”
CATEGORY
