By Laurell Technologies Corporation
Firmware for 650 series controller ver. 47002025b 04/07/21 This new firmware: - Adds - LCD Brightness (contrast) Control See below To access 47002025b's brightness control On the 650 Controller: 1. Press the Info button 2. Select Configuration using the down arrow 3. Press F1 4. Press Pg Dn twice 5. Then use the up/down arrows to adjust setting The setting will be remembered across power on/off cycles. If enabled, please be careful to not accidently toggle "Tune Motor". If you do, please power cycle the spin processor Firmware for 650 series controller ver. 47002025 11/28/17 This new firmware: Expands the number of valves and sensors that can be addressed by the controller up to a combination of 32 valves and 24 sensors, or 24 valves and 32 sensors
Spin Coaters and Spin Processors. Models shown: Laurell EDC Spin Processor with Touch Control and foot switch, Laurell H6-8 Headless, Laurell EDC Spin Processor in Wet Station, Laurell H6-8 Spin Processor in Wet Station.
CATEGORY
Using the right chuck improves coating quality. High porosity chucks for standard cover slip sizes and embedded chucks for standard microscope slides are available direct from Laurell. If you have an unusual shape and/or size substrate, a custom chuck can be made for a perfect fit.
CATEGORY
Spin Coaters and Spin Processors. Models shown: Laurell H6-23 Headless, Laurell H6-23 with extended upper housing, Laurell WS-650-23 wet station, Laurell Spin Coater with Single Shot Dispenser (SSD).
CATEGORY
