NEW Surface Protection ₹599.00 per 100 ml Select Pack Size TENI-RainGuard is an advanced hydrophobic surface treatment engineered for architectural glass, shower enclosures, and automotive windshields. It forms an optically clear, chemical-bonded barrier that repels water, prevents mineral limescale etching, and resists soap scum adhesion without altering visual clarity or peeling. Product Number SKU-TRG-100 Packing 100 ml Stock In Stock (100 units) Aqua Shield Max — Glass Shield See the Difference. Feel the Safety. A Clear View. Every Time. Liquid glass armor for architectural and automotive glass. Invisible, Breathable, Non-Sticky Untreated glass traps water sheets, mineral grime, and hard water. Visibility drops, limescale bonds permanently, and glass deteriorates. TechNanoIndia TENI RainGuard — Glass Shield is an advanced, non-aqueous, fast-flashing surface treatment that forms an invisible, durable covalent molecular shield on architectural and automotive glass. What it does: Our treatment transforms glass into an ultra-low surface energy barrier. Instead of water spreading flat and baking into chalky mineral marks, liquid instantly beads into high-angle droplets and rolls away under gravity or airflow, carrying surface dust and dissolved contaminants with it. The result is crystal optical clarity that actively rejects limescale, soap scum, and water spots. Untreated — Mineral Water Clings - Water flattens and clings. - Minerals bake into the silica lattice, leaving permanent limescale rings, soap scum etching, and hazy surfaces. Treated — Liquid Rolls Down - Water beads and sheds immediately. - High contact angle means dirt has nothing to anchor to—leaving glass transparent, streak-free, and effortless to wipe clean. Key Benefits Hydrophobic Water Beading & Rapid Roll-Off Drives water into high-contact-angle beads that shed rapidly under gravity or driving airflow. Limescale & Hard-Water Barrier Prevents dissolved calcium, silica scale, and mineral salts from chemically etching into the glass matrix. Optically Clear & Zero-Haze Maintains complete optical transparency and natural light transmission without any cloudy film or yellowing. Safer Driving & Lower Maintenance Bathrooms Enhances wet-weather driving visibility through windshields and drastically cuts down shower enclosure cleaning time. Easy-to-Clean Non-Stick Surface Soap scum, shampoo oils, and road grime wipe away cleanly with plain water or a damp microfiber cloth. Covalent Substrate Bonding Chemically links to the silica structure of the glass rather than sitting as a peelable topical wax. Perfect For Automotive Glass Windshields, side windows, and rear mirrors Residential & Hospitality Shower enclosures, glass railings, and bathroom partitions Solar PV Panels Enhances self-cleaning efficiency during rainfall Architectural & Marine Exterior curtain walls, skylights, and marine vessel glazing How to Apply 1. Clean & Decontaminate Clean glass thoroughly to ensure it is 100% free of existing limescale, oils, and detergent film. Dry completely. 2. Apply First Coat Spray TENI RainGuard onto a clean, lint-free microfiber pad or applicator cloth and wipe evenly using firm, overlapping cross-hatch strokes. 3. Secondary Coat Apply a light second pass within 5 to 10 minutes to ensure 100% continuous micro-coverage. 4. Buff Clear Allow the carrier solvent to flash off (approx. 5 minutes). Buff the surface with a clean, dry microfiber cloth until crystal clear. 5. Cure Window Keep protected from standing water for at least 2 to 4 hours. Full covalent cross-linking completes within 24 hours. Product Line: TENI RainGuard — Glass Shield Chemistry: Non-aqueous / Anhydrous reactive alkylalkoxysilane matrix Curing Timeline: Initial set: 2–4 hours | Full covalent bond: 24 hours Optical Finish: 100% Invisible, non-film forming, optically matched Theoretical Yield: 250 to 300 sq. ft. per Litre (~125 to 150 sq. ft. per 500 mL) Shelf Life: 24 months in unopened, original container stored below 30°C DIRECTIONS FOR SHOWER & BATHROOM GLASS STEP 1: PREPARATION & APPLICATION - Clean & Prep: Clean glass thoroughly to remove all hard-water stains and soap scum. Wipe dry with IPA. Work in a well-ventilated area on cool glass away from direct heat. - Coat 1: Mist lightly directly onto a manageable section of glass. Spread evenly using overlapping cross-hatch strokes with a clean applicator pad. - Coat 2: Apply a second light pass within 3–5 minutes to ensure uniform coverage. - Haze & Buff: Allow 5–8 minutes until a light translucent haze appears. Wipe clean with a dry microfiber cloth, then buff thoroughly to optical clarity. STEP 2: 24-HOUR CURE PROTOCOL (MANDATORY) - Allow the treated glass to remain completely dry for 12–24 hours prior to first use. Do not expose to water, hot steam, or condensation during this period to ensure complete nano-chemical bonding to the substrate. STEP 3: DAILY MAINTENANCE - Perform a quick fresh-water rinse after every shower (or a single pass with a soft rubber squeegee) to prevent soap scum, body wash surfactants, and mineral deposits from settling on top of the coating. REAPPLICATION: - Reapply approximately every 4–5 weeks (or as needed based on water hardness and shower frequency) to maintain peak water-repelling clarity. STATUTORY SAFETY & CAUTIONARY STATEMENTS - SLIP HAZARD: Protect shower floors and foot-traffic areas. Any overspray on tiles or shower trays will create an extreme slip hazard. Immediately clean floor overspray with detergent and water. - FLAMMABLE LIQUID: Keep away from heat, open flames, hot geysers, and electrical ignition sources. Keep bathroom doors open and exhaust ventilation running during use. - EYE & SKIN PRECAUTION: Avoid eye contact. In case of contact, flush immediately with water for 15 minutes. Wear gloves if you have sensitive skin. Do not ingest. Store tightly closed below 30°C. KEEP OUT OF REACH OF CHILDREN. - LIMITATION OF LIABILITY: TechNanoIndia warrants only the active composition of the product. Due to varying water chemistry, substrate conditions, and cleaning regimens beyond our control, durability periods are indicative estimates and do not constitute an express financial warranty. Why TechNanoIndia? Molecular surface engineering. One targeted application = months of enduring clarity, easy maintenance, and surface protection.
TENI-GRIP Ultra P anti-slip treatment, formulated for vitrified, porcelain (PGVT) and granite floors. Creates invisible micro-texture, targets a wet SCOF between 0.5 and 0.6 or above, preserves gloss. 250 mL covers 25-30 sq ft. Product Number TN-GRIP-ULTRAP Packing 250 ml Stock In Stock (199 units) TENI-GRIP ULTRA P Anti-slip protection engineered for vitrified, porcelain & granite floors Ultra P is the specialist formulation for hard, dense mineral surfaces — vitrified tiles, full-body porcelain, PGVT (glazed vitrified porcelain tiles) and polished or honed natural granite. It creates a dense field of invisible suction micro-pores that engage the moment the floor gets wet. Wet SCOF between 0.5 and 0.6 or above – measured per NFSI B101.1-2022 Invisible treatment Preserves gloss & finish 250 mL covers 25-30 sq ft How it works Unlike sticky films or abrasive grip tapes that peel, yellow and trap dirt, TENI-GRIP works at the microscopic level. The solution is spread evenly across the floor as a uniform wet sheet, where it briefly conditions the polished surface into invisibly small traction pores. Instead of pooling into a slippery puddle, water now spreads into a thin, continuous film. When you step on it, the microscopic pores give the water somewhere to be displaced: it is drawn into the pores and held away from your shoe sole, allowing your foot to make firm, direct contact with the floor and gain grip rather than slip. On an untreated floor, there are no pores to absorb the water, so it stays trapped beneath the shoe as a slippery layer — these micropores change that, displacing the water and helping your feet find secure footing — so wet traction improves dramatically while the floor keeps its original look, gloss and finish. Key benefits Invisible micro-texture No change to appearance, gloss or finish. Nothing visible changes after treatment. Wet SCOF between 0.5 and 0.6 or above Measured using a method referenced in NFSI B101.1-2022, before and after treatment. Long-lasting grip Long-Lasting Traction — Zero Peeling: - Residential Floors: Up to 3–5 years of reliable wet-traction safety (requires deep cleaning every 2 years). - Commercial Facilities: 1–2 years under continuous heavy pedestrian traffic (annual or bi-annual deep maintenance cycle). Indicative service life is application- and traffic-dependent. Current product guidance subject to substrate, pedestrian traffic, cleaning, maintenance and wear conditions. These figures are indicative and are not a performance warranty. Gloss preserving Gloss-preserving kinetic buffers protect the polish on expensive porcelain and granite. Low-hazard once cured Once neutralized and cured, the floor can return to normal use and cleaning (see SDS for details). Hygienic & odour-free No sticky residue and no trapped dirt — your usual cleaning routine stays the same. Order Ultra P when your floor is Vitrified, porcelain or granite: - Full-body / double-charge vitrified tiles - Porcelain tiles (PGVT / glazed vitrified porcelain) - Polished or honed natural granite Is your floor standard ceramic? Ultra P is tuned for dense vitrified and stone surfaces. Standard glazed ceramic tiles need the gentler TENI-GRIP Ultra C formulation. Product TENI-GRIP Ultra P Suitable flooring Vitrified, porcelain (PGVT) & granite Wet SCOF target between 0.5 and 0.6 or above (measured per NFSI B101.1-2022) Application rate 100 mL per sq m (uniform wet sheet) Dwell window 1-2 min full-body vitrified; 3-4 min PGVT / granite Coverage 250 mL covers approx. 25-30 sq ft Neutralization TENI Friction Stop, then rinse with water Professional service On-site application with documented SCOF results Application at a glance 1. Pre-wash: Strip factory wax with TENI-Prewash, rinse and dry. 2. Apply: Spread a continuous wet sheet at 100 mL/sq m. 3. Dwell: Hold for the timed window; keep the film wet. 4. Neutralize: TENI Friction Stop, then rinse and squeegee clean. Full step-by-step guidance, the calibrated 10 x 10 cm micro-patch pilot test and the substrate dwell-time chart are in the DIY Kit & Application Guide. Choose by your floor tile. Have ceramic tiles instead of porcelain or granite? Order TENI-GRIP Ultra C (use the variant selector above). Marble and soft natural stone should use TENI-GRIP Supra; never apply Ultra chemistry to calcite marble or glass. Applications Vitrified, porcelain (incl. PGVT) and polished/honed granite - lobbies, restaurants, malls, hospitals, pool decks and other wet areas. TENI-GRIP Ultra P: For vitrified, porcelain (PGVT) & granite. Dwell 1–4 minutes.
CATEGORY
High-purity ZnO nanoparticles for research and industrial applications Product Number TN-ZINCOXID CAS Number 1314-13-2 Purity=99.9% Particle Size 20-30 nm Packing 100 g Stock In Stock (100 units) Zinc Oxide (ZnO) nanoparticles with exceptional purity and uniform particle size distribution. Suitable for coatings, electronics, cosmetics, and research applications. Characterized by TEM, XRD, and DLS for complete quality assurance.
CATEGORY
Alpha-Al2O3 nanoparticles for advanced ceramics and coatings Product Number TN-ALUMINIU CAS Number 1344-28-1 Purity=99.9% Particle Size 20-50 nm Packing 500 ml Stock In Stock (80 units) High-purity alpha aluminium oxide nanoparticles ideal for thermal management, ceramics, and protective coatings. Excellent hardness and thermal stability for demanding industrial applications.
CATEGORY
Industrial-grade MWCNT for composites and coatings Product Number TN-MULTIWAL CAS Number 308068-56-6 Purity=95% Particle Size Diameter: 10-20 nm Packing NOS Stock In Stock (50 units) Multi-walled carbon nanotubes offering excellent reinforcement for polymer composites, conductive coatings, and battery electrodes. Cost-effective solution for large-scale applications.
CATEGORY
