By Laurell Technologies Corporation
Note to Porous Chuck Users 02/08/13 Cleaning the High Porosity Insert The insert can be cleaned by wiping with an acetone wetted wipe, or in severe cases, the insert can be removed and soaked in acetone (we recommend no longer than 1-2 hours). If any other solvent is used, we recommend the same guidelines. Soak the insert, then rinse in an appropriate rinsing solution and blow dry with high pressure N2.
Spin Coaters and Spin Processors. Models shown: Laurell EDC Spin Processor with Touch Control and foot switch, Laurell H6-8 Headless, Laurell EDC Spin Processor in Wet Station, Laurell H6-8 Spin Processor in Wet Station.
CATEGORY
Using the right chuck improves coating quality. High porosity chucks for standard cover slip sizes and embedded chucks for standard microscope slides are available direct from Laurell. If you have an unusual shape and/or size substrate, a custom chuck can be made for a perfect fit.
CATEGORY
Spin Coaters and Spin Processors. Models shown: Laurell H6-23 Headless, Laurell H6-23 with extended upper housing, Laurell WS-650-23 wet station, Laurell Spin Coater with Single Shot Dispenser (SSD).
CATEGORY
