MV4-D1280-L01-3D07-G2

By Photonfocus AG

- Up to 65000 profiles/s @ 1280 x 11 resolution - Detection of up to 4 peaks in a single scan - High reliability and accuracy of 3D reconstruction, due to the non-linear interpolation technique used in the detection algorithm - Laser line detection with up to 1/64 sub pixel accuracy - Linear Mode / multiple slope (High Dynamic Range) - Configurable region of interest (ROI) - Temperature monitoring of camera - Low trigger delay and low trigger jitter - Extended trigger input and strobe output functionality - 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL) - 3x Isolated outputs (2x open drain, 1x TTL highspeed) - Free GUI available (PF 3D Suite) for an easy system set up and visualisation of 3D scans The MV4-D1280-L01-3D07-G2 (LUX1310) 3D CMOS cameras were developed for high triangulation rates. To achieve this, the LUXIMA CMOS image sensor LUX1310—which has been optimized for high frame rates and high sensitivity—was combined with two robust algorithms for determining the triangulation line within the camera’s FPGA. Interface GigE Model Mono Sensor LUX1310 1280 x 1024 Data / Specifications Interface: gige Application: Lowlight, 3d Pixel clock: 80 MHz Greyscale resolution: 8bit Shutter: global Performance curve: Linear Trigger Modes: Free running, Ext trigger, Sw trigger Exposure time range: 10µs – 186ms Fixed Pattern Noise: < 1DN RMS @ 8Bit Analog Gain: no Digital Gain: 0.1 to 15.99 (FineGain) Operating temperature: 0°C... 50°C / 20... 80 % Storage temperature / moisture: -25°C... 60°C / 20... 95 % Power Supply: PoE (IEEE 802.3bt standard Class 4) or Wall adapter (+12VDC (-10%)... +24VDC (+10%)) Power Consumption: <9.7W Lens Mount: C mount I/O Inputs: 4x Isolated inputs or shaft encoder A, B, Z, Y interface (RS422, TTL, D-HTL, HTL) I/O Outputs: 3x Isolated outputs (2x open drain, 1x TTL highspeed) Connector I/O (Power): 17 pin M12 Connector Interface: X-coded M12 Dimensions: 59 x 59 x 89.6 mm3 Mass: 465g Conformity: Ce, Rohs, Weee IP Code: IP40 Sensor Model: LUX1310 Technology: CMOS Resolution: 1280 x 1024 Pixel size: 6.6µm x 6.6µm Optical Diagonal: 10.82mm Active Area: 8.45mm x 6.76mm Dark Current: 41100e-/s Readout noise: 25e- Full capacity: 17ke- / 130:1 Dynamic Range: 57dB Spectral range: VIS Responsivity: Monochrome: 994 x 10³ DN / (J/m²) @ 560nm / 8bit Quantum Efficiency: Monochrome: < 54% Optical Fill Factor: 45 % (without micro lenses) Sensor Shutter: Global Shutter