By Nano-Yield
Nanoliquid technology for delivering potassium and enhancing nutrient uptake NanoK® delivers vital potassium to crops using nanoliquid™ technology. NanoK® features a potassium acetate formulation superior for foliar uptake. Potassium ensures a strong plant structure resulting in enhanced crop quality and yield. NanoK® also helps decreases drought stress through improved water regulation. Nanoliquid™ technology is a patented and environmentally sustainable crop solution for improving plant uptake of agricultural inputs. Analysis: 0-0-21 General Application: soil and foliar applications General Rate: USA 4 oz/ac | INTERNATIONAL 300 ml/ha The general use rate for NanoK is 4-6 fl oz per acre. Apply 6-12 fl oz per acre for high volume applications (greater than 50 gallons per acre). A reduced rate of 2 fl oz per acre may be used for low volume aerial applications (less than 5 gallons per acre). Use NanoK to supplement crop nutrient applications as needed according to recommendations in your nutrient management plan. Product Benefits: - Superior formulation for foliar uptake - Supports drought stress recovery - Enhances nutrient uptake - Compatible with most liquid fertilizers - Clean, easy handling and safe for the environment General Use: NanoK is effective for both soil and foliar applications. Add NanoK following other fertilizer inputs in sufficient water to ensure adequate coverage. Mix well. Surfactant products should be added after mixing NanoK with crop inputs. Storage & Handling: STORE IN ORIGINAL CONTAINER AND PROTECT FROM FREEZING. DO NOT STORE PRODUCT IN DIRECT SUNLIGHT FOR EXTENDED PERIODS OF TIME. KEEP CONTAINER SEALED WHEN NOT IN USE. IN THE EVENT OF A SPILL, CLEAN-UP PROMPTLY USING TRAINED PERSONNEL AND PRE-PLANNED PROCEDURES OR CONTACT CHEMTREC AT 1-800-424-9300 FOR ASSISTANCE. Precautions: This product does not meet the criteria for GHS classification in accordance with: OSHA (29 CFR 1910.1200). It is nonetheless advised that user wear personal protective attire. Avoid contact with eyes and skin. Avoid breathing vapors or spray mist. Do not eat, drink, or smoke when using this product. Wash hands thoroughly after handling. Use adequate ventilation. If symptoms persist, contact a poison control center or doctor for treatment advice. In the event of a spill, clean-up promptly using trained personnel and pre-planned procedures. Refer to Safety Data Sheet (SDS) for additional information. The Science: Simple. Substantiated. Sustainable Science. Our technology is proven and patented; it encapsulates the inputs you already use into tiny nanoparticles that glide through foliar and root barriers, lodging themselves in the right locations within a plant to deliver their payloads. Nanotechnology is relatively new in agriculture but is being studied and used across multiple fields including science, mechanics, electronics, biology, and medicine. Our products effectively work as a delivery system for nutrients and crop protection products. The particle protects molecules from environmental losses and efficiently delivers them to plants at the cellular level. Through endocytosis, one nanoparticle can deliver a thousand nutrient ions, whereas in the typical process of diffusion or active transport each nutrient ion must individually pass through the cell membrane.
Nanoliquid technology for delivering zinc NanoZn® pairs EDTA chelated zinc with nanoliquid™ technology to provide superior plant uptake for both foliar and soil applications. NanoZn® makes delivery of zinc possible when selective plant uptake restricts zinc absorption. NanoZn® additionally enhances plant absorption of any liquid nutrients in solution. Nanoliquid™ technology is a patented and environmentally sustainable crop solution for improving plant uptake of agricultural inputs. Analysis: 9Zn EDTA General Application: soil and foliar applications General Rate: USA 4 oz/ac INTERNATIONAL 300 ml/ha The general use rate for NanoZn is 4-6 fl oz per acre. Apply 6-12 fl oz per acre for high volume applications (greater than 50 gallons per acre). A reduced rate of 2 fl oz per acre may be used for low volume aerial applications (less than 5 gallons per acre). Use NanoZn to supplement crop nutrient applications as needed according to recommendations in your nutrient management plan. Product Benefits: - Advanced formulation of EDTA chelated zinc - Unique carrier technology - Prevents zinc deficiency - Enhances nutrient uptake - Clean, easy handling and safe for the environment Easy Mixing: General Use NanoZn is effective for both soil and foliar applications. Add NanoZn following other fertilizer inputs in sufficient water to ensure adequate coverage. Mix well. Surfactant products should be added after mixing NanoZn with crop inputs. Storage & Handling STORE IN ORIGINAL CONTAINER AND PROTECT FROM FREEZING. DO NOT STORE PRODUCT IN DIRECT SUNLIGHT FOR EXTENDED PERIODS OF TIME. KEEP CONTAINER SEALED WHEN NOT IN USE. IN THE EVENT OF A SPILL, CLEAN-UP PROMPTLY USING TRAINED PERSONNEL AND PRE-PLANNED PROCEDURES OR CONTACT CHEMTREC AT 1-800-424-9300 FOR ASSISTANCE. Precautions WARNING: Causes eye irritation. Causes skin irritation. Do not eat, drink, or smoke when using this product. Avoid contact with eyes and skin. Wash skin thoroughly after handling. Wear protective eyewear (goggles or face shield), and protective gloves when using this product. If swallowed: call a poison center/doctor if you feel unwell. If skin irritation occurs: Get medical advice/attention. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Refer to Safety Data Sheet (SDS) for additional information. The Science Simple. Substantiated. Sustainable Science. Our technology is proven and patented; it encapsulates the inputs you already use into tiny nanoparticles that glide through foliar and root barriers, lodging themselves in the right locations within a plant to deliver their payloads. Nanotechnology is relatively new in agriculture but is being studied and used across multiple fields including science, mechanics, electronics, biology, and medicine. Our products effectively work as a delivery system for nutrients and crop protection products. The particle protects molecules from environmental losses and efficiently delivers them to plants at the cellular level. Through endocytosis, one nanoparticle can deliver a thousand nutrient ions, whereas in the typical process of diffusion or active transport each nutrient ion must individually pass through the cell membrane.
CATEGORY
Nanoliquid™ Technology is designed to deliver more of the crop inputs needed for maximum yield. Nanotechnology makes it possible for big impacts to happen on a small scale due to the unique physical properties of nanoparticles. Nano-Yield nanoliquid technology works as a delivery system for crop inputs. While most nutrients enter the plant cell wall through diffusion or active transport, the nanoliquid particle will load the molecules and then bulk transport them through the wall by endocystosis. With every application, nanoliquid delivers more. Nanoliquid products are highly compatible with fertilizers, biostimulants, and pesticide products. The increased product performance provided by nanoliquid products results in higher yields and healthier crops. Each nanoparticle carries thousands of fertilizer ions or active ingredient molecules rapidly into the plant cell by a plant mechanism called endocytosis. While conventional products are only absorbed through diffusion and active transport, only nanoparticles are taken up via endocytosis. Loading and unloading nanoparticles: Nano-Yield nanoparticles are designed to be loaded with any common fertilizer ion or molecule. The particles carry these materials into the plant and release them once inside. Improves foliar and soil applications: When soil applied, Nano-Yield nanoparticles stay in solution or loosely cling to soil colloids making them able to deliver more nutrients to the plant. When applied by foliar application, Nano-Yield nanoparticles adhere to plant surfaces enhancing penetration through the cuticle. Both foliar and root applications will benefit from endocytosis. Our patented technology: Our nanoparticle technology is engineered for driving nutrition into the plant. Once loaded, these technologies are ready to deliver your fertilizer to the plant via endocytosis. Nanoliquid™ technology is a cutting edge technology that delivers nutrients or crop protection more efficiently into the plant either through root or foliar uptake. Nano-Yield® has engineered different nanoparticles to optimize both chemistry and nutrition to maximize delivery to the plant. Nanoliquid technology is a patented carrier additive that uses nanoparticles to load and carry any liquid products in a tank mixture. Loaded nanoparticles deliver a higher volume of crop inputs when applied to plants. How does nanoliquid technology work? Loading: Nanoparticles load with fertilizers and crop protection products instantly through ionic exchange on the charged surface of the nanoparticle. Delivery: Loaded nanoparticles are rapidly absorbed into leaves and roots through a process called endocytosis. Release: Products are released and available to the plant after the nanoparticle is absorbed. Nanoliquid products are highly compatible with other fertilizer and chemical products. Nanoliquid technology research and trials are ongoing in cooperation with research institutions and large growers. Nano-Yield™ has performed and sponsored hundreds of trials on various crops. No, nanoliquid technology enhances the efficiency of your current crop inputs without changing your program. Growers who add nanoliquid products with every application can expect improvements in crop yield and quality, as well as improved control of weeds, diseases, and insect pests. Growers report an ROI starting at 3:1 and much higher in many cases. Generally no, however some products are registered differently depending on your state. 1 oz of nanoliquid™ contains billions of nanoparticles available to load with crop inputs. Aqua-Yield® formulations target a low volume use rate to reduce packaging waste and increase ease of use.
CATEGORY
Nanoliquid technology for delivering phosphorus and enhancing nutrient uptake NanoPhos® uses nanoliquid™ technology to deliver essential phosphorus to crops. NanoPhos® features a highly efficient formulation of phosphoric acid that is resistant to tie up in soils. NanoPhos® additionally supports plant nutrient availability of other nutrient products in solution. Nanoliquid™ technology is a patented and environmentally sustainable crop solution for improving plant uptake of agricultural inputs. Analysis: 0-47-0 General Application: soil and foliar applications General Rate: USA 4 oz/ac INTERNATIONAL 300 ml/ha Easy Mixing: The general use rate for NanoPhos is 4-6 fl oz per acre. Apply 6-12 fl oz per acre for high volume applications (greater than 50 gallons per acre). A reduced rate of 2 fl oz per acre may be used for low volume aerial applications (less than 5 gallons per acre). Use NanoPhos to supplement crop nutrient applications as needed according to recommendations in your nutrient management plan. Product Benefits: - Delivers critical nutrients to support yield - Promotes strong plant establishment - Enhances nutrient uptake - Allows for reduced rates of fertilization - Compatible with most liquid fertilizers General Use: NanoPhos is effective for both soil and foliar applications. Add NanoPhos following other fertilizer inputs in sufficient water to ensure adequate coverage. Mix well. Surfactant products should be added after mixing NanoPhos with crop inputs. Storage & Handling: STORE IN ORIGINAL CONTAINER AND PROTECT FROM FREEZING. DO NOT STORE PRODUCT IN DIRECT SUNLIGHT FOR EXTENDED PERIODS OF TIME. KEEP CONTAINER SEALED WHEN NOT IN USE. IN THE EVENT OF A SPILL, CLEAN-UP PROMPTLY USING TRAINED PERSONNEL AND PRE-PLANNED PROCEDURES OR CONTACT CHEMTREC AT 1-800-424-9300 FOR ASSISTANCE. Precautions: May be corrosive to metals. Causes severe skin burns and eye damage. Harmful if swallowed. Do not breathe mist/vapors/spray. Wash thoroughly after handling. Wear protective gloves/protective clothing/eye protection/ face protection. FIRST AID: If inhaled: relocate to fresh air and seek medical attention if necessary. If skin contact occurs: wash with soap and water. If skin irritation is experienced, consult a doctor. If eye contact occurs: remove contact lenses if worn. Rinse opened eye for at least 15 minutes under running water. If swallowed: call physician or poison control center for most current information. Refer to Safety Data Sheet (SDS) for additional information. The Science: Simple. Substantiated. Sustainable Science. Our technology is proven and patented; it encapsulates the inputs you already use into tiny nanoparticles that glide through foliar and root barriers, lodging themselves in the right locations within a plant to deliver their payloads. Nanotechnology is relatively new in agriculture but is being studied and used across multiple fields including science, mechanics, electronics, biology, and medicine. Our products effectively work as a delivery system for nutrients and crop protection products. The particle protects molecules from environmental losses and efficiently delivers them to plants at the cellular level. Through endocytosis, one nanoparticle can deliver a thousand nutrient ions, whereas in the typical process of diffusion or active transport each nutrient ion must individually pass through the cell membrane.
CATEGORY
Nanoliquid technology for enhancing nutrient uptake NanoRise® is designed to protect and carry nutrients in liquid solution to improve efficiency and reduce waste. NanoRise® enhances plant nutrient uptake and availability for liquid nutrient formulations including macronutrient and micronutrient products. Nanoliquid™ technology is a patented and environmentally sustainable crop solution for improving plant uptake of agricultural inputs. Analysis: 1-0-0 General Application: soil and foliar applications General Rate: USA 4 oz/ac INTERNATIONAL 300 ml/ha The general use rate for NanoRise is 4-6 fl oz/acre. Apply 6-12 fl oz/acre when total application volume is greater than 50 GPA. A reduced rate of 2 fl oz/acre may be used for low volume aerial applications with a total application volume less than 5 GPA. Product Benefits: - Enhances nutrient uptake - Supports reduced application frequency - Unique carrier technology - Highly compatible with most products - Clean, easy handling and safe for the environment PRODUCT AVAILABILITY: California Only General Use NanoRise is effective for both soil and foliar applications. Add NanoRise following other fertilizer inputs (concentrated or blended) in sufficient water to ensure adequate coverage. Mix well. Surfactant products should be added after mixing NanoRise with crop inputs. Storage & Handling STORE IN ORIGINAL CONTAINER AND PROTECT FROM FREEZING. DO NOT STORE PRODUCT IN DIRECT SUNLIGHT FOR EXTENDED PERIODS OF TIME. KEEP CONTAINER SEALED WHEN NOT IN USE. IN THE EVENT OF A SPILL, CLEAN-UP PROMPTLY USING TRAINED PERSONNEL AND PRE-PLANNED PROCEDURES OR CONTACT CHEMTREC AT 1-800-424-9300 FOR ASSISTANCE. Precautions This product does not meet the criteria for GHS classification in accordance with: OSHA (29 CFR 1910.1200). It is nonetheless advised that user wear personal protective attire. Avoid contact with eyes and skin. Avoid breathing vapors or spray mist. Do not eat, drink, or smoke when using this product. Wash hands thoroughly after handling. Use adequate ventilation. If symptoms persist, contact a poison control center or doctor for treatment advice. In the event of a spill, clean-up promptly using trained personnel and pre-planned procedures. Refer to Safety Data Sheet (SDS) for additional information. The Science Simple. Substantiated. Sustainable Science. Our technology is proven and patented; it encapsulates the inputs you already use into tiny nanoparticles that glide through foliar and root barriers, lodging themselves in the right locations within a plant to deliver their payloads. Nanotechnology is relatively new in agriculture but is being studied and used across multiple fields including science, mechanics, electronics, biology, and medicine. Our products effectively work as a delivery system for nutrients and crop protection products. The particle protects molecules from environmental losses and efficiently delivers them to plants at the cellular level. Through endocytosis, one nanoparticle can deliver a thousand nutrient ions, whereas in the typical process of diffusion or active transport each nutrient ion must individually pass through the cell membrane.
CATEGORY
