Produces a highly durable high-gloss clear coating over painted surfaces including 2K epoxy, 2K polyurethanes, powder coatings. One-component formulation - save on labor and preparation time. Designed to be applied directly over two-component coatings. Extends in-service life of newly painted or highly oxidized painted surfaces. Restores original color, gloss, surface hardness and extreme UV resistance. High scratch resistance (4H pencil hardness). Extreme chemical resistance (>100 MEK rubs). Extreme weathering resistance (100% gloss retention). PAINT/MATERIAL COMPATIBILITY Designed to be applied over painted 2K epoxies, 2K polyurethanes, powder coatings, cement, exposed-aggregate and teak wood. PHYSICAL PROPERTIES Polymer Chemistry: Nanostructured Polyurethane Hybrid Mixing Ratio: No mixing required Recommended Dry Film Thickness: 2 mil (50 µm) Recommended Wet Film Thickness: 6 mil Pencil Hardness - ASTM D3363: 4H (ETew/NCIM Matte Additive) Pendulum Hardness (Persoz) - ASTM D4366: 120 Abrasion Resistance - ASTM D4060: 8.4 mg loss Impact Strength - ASTM D2794: > 140 Water Immersion Test - ISO 2812-2: Pass QUV Resistance - ASTM D4587: 99% Xenon WOM - ASTM G155: 99% MEK Resistance - ASTM D4752: >1500 Salt Spray - ASTM B-117: 5000 hrs. no rust, no blisters DMA – Crosslink Density - X103 mol/m3: 2.17 VOC (as received): 1.05 lbs./gal. Viscosity: 20 C P Nano-Clear NCIF Easy Clean Coating is a one component (1K), humidity cured, densely cross-linked, polyurethane / polyurea hybrid nano-coating. NCIF is manufactured using proprietary 3D nano-structured polymers producing extreme crosslink density. NCIF has very low surface energy to significantly reduce surface cleaning and repel water, ice, dirt and algae. NCIF has a high water contact angle of 120° to produce a remarkable hydrophobic surface. NCIF is the only industrial coating in the marketplace to extend the service life of painted assets by 10+ years. NCIF is designed to dramatically improve corrosion, scratch, abrasion, chemical, and UV resistance and reduce cleaning by 50%. NCIF is also designed to be used in combination with NCIM Matting Additive to produce an easy clean matte finish clear. Temperature: 40°F (4°C) to 100°F (38°C) Relative Humidity: 20% to 90% Application Potential: Fleet Vehicles. Exterior Pipelines, Lifeboats, Cargo Ships, Epoxy Floors, Exposed-Aggregate, Painted Building Structures, Railway Tank Cars, Chemical Tanks, Heavy Duty Equipment, Agriculture Equipment... Dust free, Tack free, Handle, Dry Hard Full Cure: 20-30 minutes, 30-40 minutes, 4 hours, 24 hours @ 72°F (22°C) Lower temperatures and lower humidity conditions will slow-down the curing rate. Higher temperatures and higher humidity conditions will speed-up the curing rate. Nano-Clear NCA Accelerator may be added to NCI @ 1-2% by weight to reduce dust-free and tack-free time. SURFACE COVERAGE PER GALLON 333 ft²/gallon @ 2.00 mil DFT or 31 m²/L @ 2.00 mil DFT (3 wet coats @ 2.00 mils each wet coat = 6.00 mil wet total). CURE TIME @ 72°F (22°C), 50% R.H.
Nano-Clear NC 40 for Fleet 15+ Year Performance Introducing the world's first ambient cure clear nanocoating to exceed automotive OEM and military specifications. Nano-Clear NC 40 Coating & Nano-Clear SuperCARC for Military Applications are designed to dramatically extend the surface life of painted vehicles by 15+ years. Nano-Clear NC 40 Industrial Coating dramatically improves scratch, corrosion, chemical &long-term UV resistance.Nano-Clear improves brand appearance and resale value. NC 40 Coating is a highly crosslinked polyurethane hybrid nanocoating. Designed to be applied as an overcoating directly over epoxy and polyurethane topcoatings. - Built for harsh environments where failure is not an option. - Extend Coating Life. Reduce Repaint Cycles by 2X - 3X. Nano-Clear NC 40 for Fleet Benefits: - Highly crosslinked hybrid clear coating - Extreme gloss and surface hardness - Extreme weathering and UV Resistance - Outperforms fleet topcoatings alone - Convenient HVLP or Airless application
CATEGORY
Introducing the world's first ambient cure clear nanocoating to exceed automotive OEM and military specifications. Nano-Clear NC 40 Coating & Nano-Clear SuperCARC for Military Applications are designed to dramatically extend the surface life of painted vehicles by 15+ years. Nano-Clear NC 40 Industrial Coating dramatically improves scratch, corrosion, chemical &long-term UV resistance.Nano-Clear improves brand appearance and resale value. NC 40 Coating is a highly crosslinked polyurethane hybrid nanocoating. Designed to be applied as an overcoating directly over epoxy and polyurethane topcoatings. - Built for harsh environments where failure is not an option. - Extend Coating Life. Reduce Repaint Cycles by 2X - 3X. Nano-Clear NC 40 for Fleet Benefits: - Highly crosslinked hybrid clear coating - Extreme gloss and surface hardness - Extreme weathering and UV Resistance - Outperforms fleet topcoatings alone - Convenient HVLP or Airless application
CATEGORY
Painted Assets + Nano-Clear = 15+ Year Performance Nano-Clear NC 40 is the only coating in the global marketplace to enhance and extend the service life of painted assets by 15+ years. Nano-Clear NC 40 penetrates deep into the pores of painted assets to dramatically improve gloss, surface hardness, chemical, corrosion and long-term UV resistance. Nano-Clear NC 40 is a one-component highly cross-linked polyurethane hybrid nanocoating system. NC 40 is designed to be used for above and below waterline applications. NC 40 was developed to be applied as a clear topcoating directly over gelcoatings, epoxy, polyurethane and powder coat systems. Nano-Clear Coating Benefits: - Enhances Color, Gloss & Hardness - Extreme Gloss & Abrasion Resistance - Reduces Surface Maintenance by 50% - Prevents UV Degradation of Paints - Designed for Above & Below Waterline
CATEGORY
Single component (1K) direct-to-substrate surface treatment & adhesion promoter. Nano-Clear VV-200 provides a covalent bond to properly prepared acid etched aluminum, stainless steel, TPO & ABS Plastics and glass. VV-200 provides corrosion, scratch and chemical resistance with reduced cleaning. VV-200 as Surface Treatment / Coating - VV-200 can be used "alone" directly over steel and glass - Provides corrosion, scratch and chemical resistance VV-200 as Adhesion Promoter - Forms a molecular bridge between subtrate & Nano-Clear NCI
CATEGORY
