By Institute of Polymer Materials and Technology
To determine phase transitions and thermodynamic characteristics of solids and liquid samples Specs: - Temperature from -170 to 700ºC; - 0.01 to 100°C/min; - Crucibles with a capacity of 30-100 μl; - Pressure: up to 500 bar; - Noise level RMS: 1.5 μW; - Resolution: 0.8 μW.
Determination of the thermal characteristics of solid and liquid samples Specs: - Measurement range +/- 1000 mg or +/- 200 mg with a resolution of 0.2 μg or 0.02 μg; - A furnace with a metal resistor and a temperature range from room temperature to 1600°C at a speed of scanning from 0.01 to 100°C/min.
CATEGORY
To determine the kinematic and dynamic viscosity of liquids Specs: - Rotational speeds from 0.01 to 1200 rpm; - Shear stress from 0.5 to 3·10 4 Pa; - Shear rate from 0.01 to 4000 s‑¹; - Viscosity from 1 to 10 9 mPas; - Temperatures from -20 to 180°C.
CATEGORY
To verify product quality and identify unknown samples Specs: - Type of interferometer 38 mm 60 interferometer; - Spectral range (cm-1): 7900-375; - Signal-to-noise ratio— 10000: 1; - Integration time — 5 seconds; - rp (4.3 x 10-5 A).
CATEGORY
