By Ultrasonic Systems, Inc. (USI)
Large Format, High Speed XYZ Coating System The PRISM 800 is a high performance coating system with programmable X-Y-Z motion and positioning for USI's proprietary nozzle-less ultrasonic spray head technology. The system delivers a thin, uniform application of a wide variety of coatings more precisely than other coating application techniques. This flexible and highly configurable platform is ideal for high-volume production operations. Features & Benefits Proprietary ultrasonic spray technology - Thin, defect free coating application - Thickness down to sub-micron - 95-99% transfer efficiency Fully programmable X-Y-Z platform - Large coating area - High speed X-Y motion - Precision ball screw actuators - Configurable for specific requirements - Fully integrated Windows 7 GUI - State-of-the-art Ethernet based motion and I/O controllers - Batch or in-line conveyor configuration - Up to two PMP liquid delivery systems to supply two coating heads - PMP-200 with stirring and recirculation - Integrated liquid stirring or agitation - Substrate heater with vacuum - Head rotation and tilt - Powered HEPA filter - many others Markets - Display - Fuel Cell - Semiconductor Packaging - Medical
The PRISM-500 is a high-performance X-Y-Z motion and positioning platform designed for the application of a wide variety of coatings. This flexible and highly configurable system is ideal for both production and R&D applications. All PRISM systems leverage USI’s proprietary, nozzle-less ultra-Thin Coating Application Technology (t CAT) which delivers a more precise coating application than conventional spray nozzles, film coaters, roll coaters, and jetting technology. Features and benefits: - Proprietary, nozzle-less ultra-Thin Coating Application Technology (t CAT) - Additional spray and dispense technologies available - Configurable, flexible platform to suit the requirements of precision coating applications in various markets, including: - Semiconductor Packaging - Display - Fuel Cell - Medical - Multiple liquid delivery system configurations including: - PMP-100 Precision Metering Pump liquid delivery system, features: - Micro stepping positive displacement liquid metering pump - Single or dual pump configurations available - Optional integrated fluid stirring to keep suspensions and inks mixed - Automatic pump refill from coating reservoir - Data logging - Pressurized reservoir with liquid solenoid valve for flow control - Pressurized reservoir with agitation and liquid recirculation - Available in a batch configuration or with in-line conveyor - Automatic spray head clean and purge - 3- or 4-axis of motion - Designed to spray flammable solvents - Isolated and ventilated spray area - Windows 10 based graphical user interface - Optional substrate heater with vacuum - Optional spray head rotation and tilt function - Robot load lift/shuttle station available
CATEGORY
The Ultra-Spray head is an integrated assembly consisting of an ultrasonic transducer with a spray forming tip, a liquid applicator and air directors. The ultrasonic transducer vibrates at an ultrasonic frequency ( 20 kHz). The particular ultrasonic frequency is selected based upon the material to be sprayed and the coating application requirements. In general, a lower frequency ultrasonic transducer is capable of spraying a higher viscosity liquid and producing higher flow rates. The amplitude of vibration of the spray-forming tip is also set with the ultrasonic generator. The coating liquid is delivered to the spray-forming tip on the ultrasonic transducer by liquid applicator. The liquid is stored in a reservoir and fed to the liquid applicator at a precisely controlled flow rate by a positive displacement Precision Metering Pump (PMP). The ultrasonic vibrations of the spray-forming tip break up the liquid into small drops and propel them from the tip in the form of a spray. The spray produced with ultrasonic energy alone has a very low velocity “sheet-like” pattern. Air directors are used to produce air streams to shape and accelerate the ultrasonically-produced spray. The air director impinges a jet of air on tip of the spray head opposite the liquid feed side. The resulting airflow entrains and expands the ultrasonically-produced spray to produce a flat (rectilinear) pattern up to five (5) times the width of the pattern produced by the ultrasonic energy alone. When using the air directors, the spray pattern width is a function of the spray-forming tip width and tip-to-substrate distance. Since the spray is produced with ultrasonic energy rather than pressure, and because a low-velocity air stream is used only to shape the spray, very little coating is wasted due to overspray with a transfer efficiency of 97% to 99%. All process parameters for the Ultra-Spray head are set electronically for maximum control and flexibility, including: - Liquid flow rate - Air pressure - Head height - Head speed - Motion path
CATEGORY
This nozzle-less ultrasonic spray head produces a substantially rectangular shaped coating distribution on the substrate. The rectangular shape is ideal for producing a uniform coating on a flat surface. The actual coating distribution is uniform across about 90% of the width of the sprayed pattern and the edges are “feathered” from the applied coating thickness to zero thickness. The figure below shows the spray pattern distribution comparison between the nozzle-less spray head and a traditional spray head as well as the resultant distribution after a series of overlapping passes.
CATEGORY
The coating system platform consists of an X-Y-Z-Ɵ-Ø gantry system for the motion and positioning of the nozzle-less ultrasonic spray head, as well as integrated control of the precision metering pump liquid delivery system, and transport mechanism for the carriers. All critical process parameters are managed by the platform software and control system. Additionally, a log of the critical process data is recorded and stored in a process log file.
CATEGORY
