By Lighthouse Worldwide Solutions
ApexR ™ ApexR The Standard in Environmental Monitoring for GMP-Regulated Industries ApexR remote airborne particle counters set the benchmark for environmental monitoring in GMP-regulated industries, offering unparalleled data integrity, availability, and environmental compatibility. This advanced system is designed to meet the stringent requirements of pharmaceutical, biotechnology, and medical device manufacturing facilities. Data Integrity and Risk Mitigation In critical environments where data accuracy can make or break production quality, ApexR shines. Its robust self-diagnostics virtually eliminate data errors and sensor failures, providing peace of mind for quality assurance teams. The system’s ability to store up to 3,000 records ensures comprehensive data logging for regulatory compliance. Environmental Compatibility ApexR is built to withstand rigorous cleaning protocols common in cleanroom environments. Its 304 stainless steel enclosure is resistant to frequent wipe-downs and compatible with Vapor Phase Hydrogen Peroxide (VHP) sterilization methods. This durability ensures consistent performance even in the most demanding conditions. Remote Monitoring and Real-Time and Integration With Ethernet and serial communication capabilities, ApexR seamlessly integrates into existing facility monitoring systems (FMS) or building automation systems (BAS). This connectivity allows for real-time data streaming, enabling prompt responses to any deviations from set parameters. Compliance and Calibration Designed to meet ISO 21501-4 standards, ApexR ensures particle-counting accuracy that complies with current Good Manufacturing Practices (cGMP Self-diagnostics for reliable remote counting. A photograph of an ApexR remote airborne particle counter attached to the exterior of a biological isolation cabinet. A photograph of an ApexR3 remote airborne particle counter. A photograph of an ApexR5 remote airborne particle counter. A photograph of an ApexR02 remote airborne particle counter. A photograph of an ApexR03 remote airborne particle counter. A photograph of an ApexR05 remote airborne particle counter. Accessories A photograph of an Apex Smart Bracket. Smart Bracket A photograph of an Apex Smart Bracket Shroud. Smart Bracket Shroud A photograph of the rear of an Apex Smart Bracket. Smart Bracket Shroud
Next Level Environmental Monitoring with the Apex Z™ Airborne Particle Counter Meet Apex Z: your ultimate partner in maintaining pristine cleanroom environments. This state-of-the-art airborne particle counter goes beyond simply measuring particles, giving you the confidence to manage your critical spaces with both precision and ease. With its advanced laser technology, intuitive 7-inch touchscreen, and rugged, chemically resistant enclosure, Apex Z delivers reliable results in even the most demanding settings. You'll move smoothly through your workflow thanks to features like hot-swappable batteries, flexible data views, and built-in compliance tools. Simplified Sampling Your data is only as good as your records. So Apex Z supports 21 CFR Part 11 compliance, with audit trails that log every action, user, and timestamp. You get multiple user and security levels, so only authorized folks can make changes. With storage for up to 10,000 samples, 2,500 locations, and 20,000 audit trail records, you'll never have to worry about running out of space or losing track of what happened when. Sampling should be simple, not stressful. The 7-inch multi-touch display puts all your data front and center, and the grid view makes it a breeze to see which locations have been sampled and which are up next. Color-coded indicators—green for done, blue for sampling, grey for to-do, orange for warnings, and red for alarms — help you keep track at a glance and avoid missed spots. Portable and Powerful At just over 7 pounds and with a compact footprint, Apex Z is easy to carry from room to room. It's the smallest, lightest, and quietest portable particle counter out there, so you can move fast without making a scene or breaking your back. No need to hover over the unit — just glance at the handle. Integrated status lights give you a 360-degree view of what's happening, even from across the room. You'll know instantly if everything's running smoothly or if something needs your attention. And you can forget about being tethered to a wall outlet. Apex Z comes with hot-swappable smart batteries that can run for up to 11 hours straight. Need more juice? Just pop in a fresh battery — no need to stop sampling. And if you're in a rush, you can charge up to 80% in just 90 minutes. You can even run the unit on a single battery while charging the other externally, so you're never left waiting around. A Sealed Suite of Diagnostics Apex Z isn't just another particle counter… it's built to keep you confident in your results day in and day out. Its self-diagnostics system is always running in the background, checking the laser's power, current, and supply, as well as monitoring airflow and sensor health. If anything's off, you'll know right away, long before it could impact your data. This means less downtime, fewer surprises, and more trust in your cleanroom monitoring. We know that cleanrooms are tough on equipment, but Apex Z is tougher. Its sealed enclosure is rated IP54 and is chemically compatible with all the main disinfectants – including VHP, so you can wipe it down as often as you need without worrying about damage. The rotating exhaust nozzle keeps things flexible, and the whole unit is built to handle the demands of pharmaceutical, semiconductor, and other high-stakes industries. ApexZ3 0.3 – 10.0μm Particle Size Range 1 CFM Flow Rate Key Features: - 0.3 – 10.0μm Particle Size Range - 1CFM Flow Rate - Bi-Directional Integration into LIMS EM Systems - Sealed Chemically Compatible Enclosure - Advanced Self-Diagnostics - Integrated Status Lights - Hot-Swappable Smart Batteries - Wi-Fi, Ethernet and USB Data Transfer Options - 21 CFR Part 11 Compliant - Customizable Data Reports - Built-In Cleanroom Certification Reports - 2 Year Warranty ApexZ50 0.5 - 25μm Particle Size Range 100 LFM Flow Rate Key Features: - 0.5-25um Particle Size Range - 100 LPM Flow Rate - Bi-Directional Integration into LIMS EM Systems - Sealed Chemically Compatible Enclosure - Advanced Self-Diagnostics - Integrated Status Lights - Hot-Swappable Smart Batteries - Wi-Fi, Ethernet and USB Data Transfer Options - 21 CFR Part 11 Compliant - Customizable Data Reports - Built-In Cleanroom Certification Reports - 2 Year Warranty
CATEGORY
48-Port System-In-a-Box System-In-a-Box is a pre-wired, pre-configured monitoring system built for cleanrooms and manufacturing. Traditional cleanroom monitoring systems take weeks, sometimes months, to design, wire, and validate. System-In-a-Box does it in a day. Mount it. Connect it. Monitor. That's the whole install. Key Features - 24 or 48 Ports with full sensor support - Fast installation: Pre-wired cabinets and pre-configured databases improve setup time - Built-in Compliance: 21 CFR Part 11-ready with software audit trails and validation templates - A single system to manage your monitoring - Log in via a browser to start/stop devices - Easily Managed alarms/events - Simple Creation of audit/event logs - 2-Year Warranty SIAB comes in two sizes, a 24-port Small Box and a 48-port Large Box, both with full sensor support, so you size it to your facility today and grow into it tomorrow. It runs on a wide power input range (100-240 VAC or 90-350 VDC), backed by a 2-year warranty, so it's built to keep running long after the install crew leaves. It runs on 100-240 VAC (50/60Hz, 6.1A) or 90-350 VDC (6.9A), so it fits most facility power configurations without special conditioning. IP20, built from 1.5mm galvanized steel with a matte black finish, so it holds up in a typical cleanroom or manufacturing environment. It runs on Windows 10 or Windows 11 compatible computers, or Windows Server 2019/2022. Google Chrome, Microsoft Edge, and Mozilla Firefox are supported. Apple Safari is optional in MVP. The control cabinet arrives pre-wired in an industrial steel enclosure, with the I/O list, cable schedule, and layout drawings already done. Mount your sensors, run one data cable to the PC, and you're live. LMSExpress 9 comes with the system, and it arrives with a pre-configured database. No extra software configuration is needed after install. Remote commissioning and support instructions are included with every system. A validation documentation package, protocols and templates, is available on request. Two years, standard warranty.
CATEGORY
24-Port System-In-a-Box System-In-a-Box is a pre-wired, pre-configured monitoring system built for cleanrooms and manufacturing. Traditional cleanroom monitoring systems take weeks, sometimes months, to design, wire, and validate. System-In-a-Box does it in a day. Mount it. Connect it. Monitor. That's the whole install. Key Features - 24 or 48 Ports with full sensor support - Fast installation: Pre-wired cabinets and pre-configured databases improve setup time - Built-in Compliance: 21 CFR Part 11-ready with software audit trails and validation templates - A single system to manage your monitoring - Log in via a browser to start/stop devices - Easily Managed alarms/events - Simple Creation of audit/event logs - 2-Year Warranty SIAB comes in two sizes, a 24-port Small Box and a 48-port Large Box, both with full sensor support, so you size it to your facility today and grow into it tomorrow. It runs on a wide power input range (100-240 VAC or 90-350 VDC), backed by a 2-year warranty, so it's built to keep running long after the install crew leaves. It runs on 100-240 VAC (50/60Hz, 6.1A) or 90-350 VDC (6.9A), so it fits most facility power configurations without special conditioning. IP20, built from 1.5mm galvanized steel with a matte black finish, so it holds up in a typical cleanroom or manufacturing environment. It runs on Windows 10 or Windows 11 compatible computers, or Windows Server 2019/2022. Google Chrome, Microsoft Edge, and Mozilla Firefox are supported. Apple Safari is optional in MVP. The control cabinet arrives pre-wired in an industrial steel enclosure, with the I/O list, cable schedule, and layout drawings already done. Mount your sensors, run one data cable to the PC, and you're live. LMSExpress 9 comes with the system, and it arrives with a pre-configured database. No extra software configuration is needed after install. Remote commissioning and support instructions are included with every system. A validation documentation package, protocols and templates, is available on request. Two years, standard warranty.
CATEGORY
System-In-a-Box is a pre-wired, pre-configured monitoring system built for cleanrooms and manufacturing. Traditional cleanroom monitoring systems take weeks, sometimes months, to design, wire, and validate. System-In-a-Box does it in a day. Mount it. Connect it. Monitor. That’s the whole install. 48-Port System-In-a-Box SIAB comes in two sizes, a 24-port Small Box and a 48-port Large Box, both with full sensor support, so you size it to your facility today and grow into it tomorrow. It runs on a wide power input range (100-240 VAC or 90-350 VDC), backed by a 2-year warranty, so it’s built to keep running long after the install crew leaves. Key Features - 24 or 48 Ports with full sensor support - Fast installation: Pre-wired cabinets and pre-configured databases improve setup time - Built-in Compliance: 21 CFR Part 11-ready with software audit trails and validation templates - A single system to manage your monitoring - Log in via a browser to start/stop devices - Easily Managed alarms/events - Simple Creation of audit/event logs - 2-Year Warranty You’ve got two options: the Small Box handles 24 ports, and the Large Box handles 48, both with full sensor support. Pick based on how many points you need to monitor now, and how much room you want for growth. It runs on 100-240 VAC (50/60Hz, 6.1A) or 90-350 VDC (6.9A), so it fits most facility power configurations without special conditioning. IP20, built from 1.5mm galvanized steel with a matte black finish, so it holds up in a typical cleanroom or manufacturing environment. It runs on Windows 10 or Windows 11 compatible computers, or Windows Server 2019/2022. If you’ve already got compliant infrastructure, you’re set. Remote commissioning and support instructions are included with every system, so help is there without waiting on a site visit.
CATEGORY
