By TECNAN (Tecnologia Navarra de Nanoproductos S.L.)
Hydrophobic and stain-resistant protector based on nanotechnology for footwear ✔ Hydrophobic✔ Stain resistant✔ Colourless ✔ Water-based✔ PFOA and PFOS-free✔ Breathable, compatible with GORE-TEX ® membranes. ✔Yield: 6-8m²/l Coatex Footwear is a water-based hydrophobic nanoprotector for all types of footwear. It waterproofs boots, sneakers, and shoes (keeping the natural breathability of these fabrics). It significantly reduces water penetration and makes stain removal easier. Coatex Footwear forms an invisible protective film that repels liquids and prevents them from penetrating into fabrics. Specially designed for professional and domestic applications on all types of footwear. - Hydrophobic and stain-resistant protector, based on nanoparticles, designed to repel water and stains on all types of footwear, making them easier to clean, improving their maintenance, and in addition extending their useful life. - Hydrophobic protection, repelling water and other organic liquids reducing their accumulation and absorption, fully respecting structure and natural porosity of the fabrics. - Preventive treatment against stains of different nature, both watery and oily. - Improves footwear maintenance, both for daily use and in the manufacturing process. Reduces frequency and time of cleaning, keeping them cleaner and in better condition. - Allows for natural breathability of the fabric, fully respecting structure and porosity. Compatible with GORE-TEX® membranes. - Colourless, the finish and texture of the fabrics are not affected nor become compacted. - Easy and fast application on any type of fabrics (susceptible to getting wet). - The product is fully re-applicable, with no need to remove previous product remains. 1. Preparation: Before application, it is recommended that the footwear is completely clean. 2. Application: Shake the container and spray evenly over the entire footwear. 3. Drying time: The optimal effect is achieved after a complete drying time of 48-72 hours.
Non-stick and colourless ceramic nano protector. ✔ Non-stick✔ High durability✔ Available in different finishes ✔ Easy-to-clean✔ High hardness✔ Yield: 10-15m²/l²/l TECNADIS MULTICOAT CLASSIC is a colourless, non-stick ceramic nano protector, which provides gloss and hardness, as well as facilitating the cleaning of materials. It was designed to be applied on metallic, porcelain, plastic or painted surfaces. It is based on a dispersion of ceramic nanoparticles that creates a colourless non-stick protective layer, providing gloss and hardness to the treated surface. It also prevents premature deterioration caused by external agents such as water, ice, humidity, rust, saltpetre, corrosion, UV radiation, as well as that caused by dirt (stains, oils, grease, paint, scratches, limescale, etc.). - Non-stick nano protector with easy-to-clean properties for metals, ceramics, plastics or painted surfaces. - It creates a colourless protective layer that provides gloss and hardness to the treated surface. Available in different colours and finishes (transparent, black, forge grey, metallic grey…). - It acts as protective barrier, preventing premature deterioration caused by some external agents such as water, ice, humidity, rust, saltpetre, corrosion, UV radiation, graffiti, urine, as well as natural deterioration caused by dirt or scratches. - High durability: more than 3 years. - Easy maintenance, cleaning and demoulding, thanks to its non-stick power. - It extends the lifetime of materials, making maintenance and cleaning intervals longer. - Room temperature curing. It does not require heat. However, the curing process can be accelerated with temperatures of 120-130°C for 1 hour. - Resistant to temperatures of 140-150°C. - Resistant to solvents and cleaning products. - The final thickness of the standard coating is between 10-20 microns, but it can vary depending on the properties sought. - Easy application, by aerosol or spray gun. - It features great adhesion to surfaces. - Re-applicable. It is possible to repair damaged areas without having to remove the previous coating remains. If necessary, it can be removed by surface polishing. Gama de Colores en Círculos BLACK FORGE GREY METALLIC GREY TRANSPARENT 1. Surface preparation: The surface must be clean and dry before application. Avoid the presence of dust or solid particles of any kind on the surface. It is recommended to completely remove all traces of rust or corrosion. Degrease the surfaces to be protected with appropriate solvents or cleaners. 2. Application: - Shake the container vigorously before use to ensure homogeneity of the product. - Spray evenly over the surface until the desired finish is achieved (avoiding over-spraying and sagging as far as possible). It is recommended to apply the product by means of a compressed air sprayer, electric airless sprayer or automated spraying systems for industrial series. 3. Curing: - At room temperature: Dry-to-touch 4 hours. Complete curing after 1-2 weeks. - Oven: 120-130°C for 1 hour.
CATEGORY
Nano ceramic corrosion protector for metals ✔ Corrosion protection C4-C5 ✔ Protection agains extreme agents ✔ Cathodic protection ✔ Extra hardness ✔ Easy maintenance ✔ Yield: 8-10m²/l TECNADIS MULTICOAT ANTICORROSION is a high-performance corrosion protector (C4-C5 high) for metals exposed to aggressive environments. It is based on a dispersion of ceramic and metallic nanoparticles that provide advanced and long-lasting cathodic protection. - Metallic grey finish protector of high hardness and great adhesion, with the option of including non-stick property. - Protects metal surfaces against corrosion, rust, impacts, and scratches. - One-component protection for metal surfaces. - Protection against external agents (water, ice, humidity, saltpetre, rust, etc.). - Metallic grey nano protector that provides advanced and long-lasting cathodic protection. - Coating of high corrosion resistance, Category C4-C5 High (meeting the criteria of tests carried out on carbon steel based on the UNE EN ISO 12944-6:2018 Standard). - The final standard thickness of the coating will depend on the corrosion resistance properties sought and may vary from 15-50 microns, approximately. - It creates a protective layer of metallic finish that works as a cathodic protection on metals, reducing the deterioration caused by external agents such as water, ice, humidity, rust, saltpetre, corrosion, UV radiation, as well as natural deterioration caused by dirt or scratches. - High durability. - It provides hardness to the treated surface. - Room temperature curing. It does not require heat. However, the curing process can be accelerated with temperatures of 120-130°C for 1 hour. - Resistant to temperatures of 140-150°C. - Resistant to solvents and cleaning products. - Easy application, using aerosol or spray gun. - It features great adhesion to surfaces. - Re-applicable. It is possible to repair damaged areas without having to remove the previous coating remains. If necessary, it can be removed by surface polishing. 1. Surface preparation: The metal surface must be clean and dry before application. Avoid the presence of dust or solid particles of any kind on the surface. It is recommended to completely remove all traces of rust or corrosion. For high corrosion protection, remove paints, varnishes or previous treatments, as well as any traces of rust and corrosion. Degrease the surfaces to be protected with appropriate solvents or cleaners. 2. Application: - Shake the container vigorously before use to ensure homogeneity of the product. - Spray evenly over the surface until the desired finish is achieved (avoiding over-spraying and sagging as far as possible). It is recommended to apply the product by means of a compressed air sprayer, electric airless sprayer or automated spraying systems for industrial series. 3. Curing: - At room temperature: Dry-to-touch 4 hours. Complete curing after 1-2 weeks. - Oven: 120-130°C for 1 hour. - TECNADIS MULTICOAT ANTICORROSION PRIMER: this is a high-performance corrosion protector (Category C4-C5 High) used as a primer in a multi-layer system. - TECNADIS MULTICOAT ANTICORROSION FINISH: this is a protector with the same corrosion resistance properties (Category C4-C5 High) but with additional non-stick properties. For direct use on metal and as a final layer.
CATEGORY
Nanotechnology-based rain repellent for vehicle windscreens. Rain repellent Anti-icing: down to -5ºC Repels water and dirt 12 months Invisible Yield: 10-15ml/ m² Tecnadis GWR is an innovative rain repellent treatment for vehicle windscreens: car, lorry, bus, train… Thanks to its hydrophobic(water repellent) effect, raindrops barely touch the glass surface, and when driving at speeds above 60 km/h, they disappear quickly, without the need to use windscreen wipers. The result is improved visibility while driving in heavy rain. Additionally, it also protects surfaces from the accumulation of dirt, insects, dust and other deposits, such as ice, preventing its adhesion down to -5ºC. - Rain repellent treatment for vehicle windscreens: car, lorry, bus, train; specially designed to improve driving visibility in the event of heavy rainfall.. - It provides hydrophobic: protection: thanks to its hydrophobic effect, raindrops barely touch the surface of the glass and when driving at speeds above 60 km/h they disappear quickly, without the need to use the windscreen wipers. - Repels rainwater, improving visibility and therefore safety behind the wheel: - • Reduces reaction time by more than 1 second thanks to improved visibility, which is equivalent to 27 metres of travel at a speed of 100km/h, thus increasing safety at high speeds, which is when the highest number of accidents occur. - Improves daytime and night-time visibility in heavy rainfall situations by approximately 34% in terms of minimum visual angle. Increases visibility even when the vehicle is stationary. - Anti-icing: Protects against ice, reducing its adhesion to the glass (down to -5°C). - High durability, up to 12 months / 20,000km The treatment remains active for 10-12 months, depending on driving conditions. - Facilitates cleaning of insects, dust and other incrustations. - Easy and fast application, less than 5 minutes. - Invisible: Does not form a film and leaves no visible traces on the glass (as long as the instructions for use are followed). - Anti-UV: Does not degrade on exposure to UV rays. - Does not release hydrochloric acid on application. - 100% compatible with materials adjacent to the windscreen 1. Cleaning: Before applying, it is important that the glass is clean and completely dry. 2. Application: Shake the container and apply. It can be sprayed directly over the surface or sprayed onto a cloth or paper and then spread. 10-15ml of product is sufficient to protect a standard windscreen. 3. Spread and polish Immediately afterwards, spread the product evenly with the help of a cloth or paper until the glass is completely transparent. 4. Drying/Curing No drying/curing time is necessary. The treated glass can be exposed to rain/water within a short time after application (approx. 10-15 min.). It is advisable not to use windscreen wipers until 30 minutes after application. The optimum water repellent effect is reached after 1-2 hours after application.
CATEGORY
Hydrophobic and oleophobic tone enhancer based on nanotechnology for porous building materials. ✔ Hydrophobic ✔ Oleophobic ✔ Yield: 5-15 m²/l ✔ Breathable ✔ Tone enhancer ✔ Certified durability over 10 years ✔ Solvent-based TECNADIS PRS PERFORMANCE EC PLUS (Especial Color), hydrophobic and oleophobic tone enhancer plus, based on nanoparticles for porous building materials. This protector can be used on all types of vertical surfaces (facades) and horizontal surfaces (floors), with special application on concrete, natural stones, bricks, monolayer mortars, prefabricated, clay/terrazzo, as well as mixed surfaces in which different materials and porosities are found, both in rehabilitation and new construction. This product has the same features as TECNADIS PRS PERFORMANCE EC, but it enhances even more the tone of the substrates without adding shine. - Hydrophobic and oleophobic protector, tone enhancer, based on nanoparticles for porous building materials, It was designed to protect both vertical surfaces (facades) and horizontal surfaces (floors) in areas with high rainfall or surfaces highly exposed to water, with the aim of delaying the appearance of any external agent produced by humidity (algae, moss, mould, etc.). - Excellent solution for rehabilitation and new construction, with special application on concrete, natural stones, bricks, mortars, monolayers, prefabricated, clay/terrazzo and mixed surfaces. - It does not form film, does not seal, the microporosity of the substrate remains unchanged allowing the breathability of the substrate. - Certified durability over 10 years, against rain on vertical surfaces or surfaces not subjected to continuous abrasion. - No chemical degradation over time due to its inorganic composition. No yellowing. No polymerisation reactions, catalysis, etc. - Totally resistant to UV radiation. - It intensifies/enhances the tone of the material (without adding shine). It does not alter the colour or structure of the treated substrate; it simply enhances it (wet effect). A PLUS version is available, which increases even more the tone. Specially suitable for natural stone. - Re-applicable, with no need to remove previous product remains. Easy handling and application. - Thanks to its high water repellency surfaces keep cleaner for longer. 1. Surface preparation: Before application, surface must be completely clean and dry. Avoid the presence of fissures or cracks in the substrate. 2. Application: Shake the container vigorously. Apply the product with a hand-held sprayer or a standard airless sprayer (low pressure), brush or roller. It is recommended to carry out two cross applications, and the second one can be applied on the substrate still wet. 3. Drying time: Optimum effect is achieved after a complete drying time of 24 hours (against water) and 48 hours (against stains).
CATEGORY
