Spin 3000 Software

By Laurell Technologies Corporation

Spin 3000 Version 1.07.08 - 03/14/24 03/16/24 This new version of Spin 3000: - Changes - Relaxes permissions on changing valve types. (e.g., Valve to syringe) Spin 3000 Version 1.07.07 - 09/06/23 09/06/23 This new version of Spin 3000: - Adds - Allow all users to operate vacuum button on toolbar - Changes - Halves serial timeouts from 600 to 300ms - Adds - Relinquish thread while waiting for message response - Changes - Message Pump so it inspects message queue just once - Changes - Serial sends so they relinquish thread while waiting for response (via message pump) - Enables - Hooks for Alternate Baud Rates Contains hooks for Bluetooth detection and automatically switching to 115200 (doesn't though), if supported by spin processor - Fixes - Local Sensor Polarities Spin 3000 Version 1.07.06 - 05/17/22 05/17/22 This new version of Spin 3000: - Fixes - On 650 firmware versions prior to 47002025h or headless 47002203a, including 47002203a, failure to set homing option causes changes to settings like "Spin Processor Configuration | Controller | Serial Number" or "Inputs/Outputs | How Many" to fail. Spin 3000 Version 1.07.05 - 04/25/22 04/25/22 This new version of Spin 3000: - Adds - Administrator may set motor hot threshold and recorded high - Requirements for following additions: 650 Firmware 47002025h or later LZ Firmware 47002300J or later Hz Software ELMO_Homer4 or late - HL SYSTEMS DO NOT support these additions - Adds - Display Hz/Lz Firmware Version - Adds - Making Homing Optional for Hz/Lz Drives by a privileged user (administrator) - Adds - Reversing the Lid Lock action by a super user (factory) This requires a reverse acting Bimba so the lid is normally locked when power is off. Spin 3000 Version 1.07.04 04/27/21 This new version of Spin 3000: - When a configuration change is made by a privileged user (e.g., administrator) the number of valves, outputs, or sensors in use are left unchanged - When setting the spin processor's clock, fixes the year being set incorrectly Software Updates: Spin 3000 ver. 1.07.02 - Allows the software to use the extra valves and sensors in the firmware update above Spin 3000 software ver. 1.06.02 06/09/16 This version adds two new features: Unless forced to do so, Spin 3000 waits for status messages from a spin processor before soliciting spin processor configuration information. This Should eliminate "hang" when attempting to get configuration information from an unconnected Bluetooth capable spin processor. Program sheets are no longer tightly coupled horizontally to their containing notebook. This means the notebook can be horizontally resized to a size significantly larger than the program sheet. It is bound only by the size of the Spin 3000 window. The resizing is not stored for future runs This is particularly useful for displaying a large number of program tabs for a spin processor with no valves or sensors. Spin 3000 software ver. 1.06.01 05/18/16 Added features: Administrator level users now have a "Tune Motor" option This version fixes several issues including the following: Fixes Sending configuration when refreshing programs on spin processor, now sends just the Program Count Fixes Failure to get Spin Processor configuration at startup or reconnections Fixes Comparison of notebook and spin processor to include the Model Number, and Serial Number Fixes Stops receiving when switching back to Spin Processor operational mode Spin 3000 software ver. 1.05.09 10/31/13 This version allows foreign language users to administratively login, handling multiple Spin Processors connected simultaneously, and limits the maximum number of permissible processes on a sheet to the associated maximum number of spin processor programs. It is compatible with Bluetooth and legacy 650 systems. Spin 3000 software ver. 1.05.07 09/23/13 This version allows Spin 3000 to use COM ports 10 and higher, and is compatible with legacy 650 systems. Other software revisions addressed: This version fixes crashing issues on some Windows 7 systems when Spin 3000 starts and a RS-232 USB adapter is not installed Improves uploading of programs from the controller to a PC Revision addresses a software failure when 3 or more programs are entered with identical 10-character names Improved software capabilities such as: Remote running from PC Run record function Copy notebook (useful for copying programs from one spin processor to another) Queries OS for available COM ports Import record file capability with auto-loop detection (requires WS-650 firmware 47000020d/47000022d or higher) Prevent crashing when right-clicking on table headings Mousewheel sheet movements Data entry issues on "Configure Spin Processor" Dialog Resetting range issue for speed & acceleration ADVISORY - Installing Spin 3000 software 01/18/11 Users having issues installing Spin 3000 are advised to follow best practices when installing this (or any) software. - 1. Close all currently running applications - 2. Verify computer's color setting is set to 32 bit. Use medium to maximum resolution. - 3. Disable any running anti-virus software - 4. Right-click the installer and Run As Administrator ( especially on Windows 7/Vista ) - 5. Complete software installation - 6. Re-enable anti-virus software - 7. Restart the system & run application on subsequent startup