By NANO-X GmbH
Sealing for concrete and stone surfaces! Durable weather resistant and colour-enhancing coating! x-protect® EC 7047 and 7048 are durable sealings for mineral substrates (concrete, natural stones, plaster). The materials produce a glass-like protective coating on the surfaces. The materials have a colour-enhancing effect and are available in glossy (7047) and matt (7048). Colouring, UV protection or antibacterial additives for a better protection against fouling can be customised.
Our universal classic for all corrosion problems! Solvent-based silver zinc flake coating with very good corrosion protection on steel, cast iron and other components made of iron - Dip or spray application, also aerosol spray - Thermal hardening from room temperature to 300 °C possible, also inductive - The solid is approx. 56 %. - With an applied minimum coating thickness of 10 to 15 µm, 1,300 h are achieved in the neutral salt spray test (DIN EN ISO 9227) without results respectively C5 according to classification of data sheet MB434 of the Stahl-Informations-Zentrum.
CATEGORY
Anti-fingerprint coating for stainless steel and PVD for application by coil coating! Durable fine surfaces for many applications! Anti-fingerprint coating for stainless steel coil - Coil coating - PMT 250 °C - Solid content approx. 50 % - Coating thickness approx. 3-5 µm - Weldable - High chemical resistant - Abrasion-resistant Universal application for kitchens, kitchen equipment, electrical appliances, etc. Matting and colouring can be designed individually as in a modular system.
CATEGORY
x-tex® EC 5029 – Impregnation for textiles and fabric - concentrate! "Easy-to-Clean" impregnation for textiles and fabric! x-tex® EC 5029(concentrate) and the ready-to-use depleted x-tex® EC 5028 are suitable for the impregnation of textiles (PES, PA,...), wool and cotton. The material dries at room temperature, shows a very good water repellency and raises the stain resistance of the fibres against coffee, grease, red wine, etc.
CATEGORY
Anti scale for the hot forming! For the protection against scale during single-stage and two-stage press hardening! Solvent- and aluminium-based coating material to prevent scale during the hot forming or press hardening - Suitable for coil application - Hardening 220 °C PMT - Temperature stable up to approx. 1,000 °C - Formable and weldable - Thermal hardening from 130 °C to 300 °C - The solid is approx. 20 %. - Coating thickness approx.2-3 µm
CATEGORY
