By Lighthouse Worldwide Solutions
Vertex Series Where Gamma Immunity and Sensitivity Meet Vertex 50 ™ and Vertex 100 ™ Liquid Particle Counters for Ultrapure Water Vertex from Lighthouse Worldwide Solutions ® redefines performance in liquid particle counting. Available in two models: Vertex 50 ™ and Vertex 100 ™, this line delivers unparalleled detection sensitivity and compact precision for ultrapure water applications. Vertex 50 is the smallest and lightest 50 nm liquid particle counter on the market, featuring the industry’s lowest zero count levels and integrated manual flow control. Vertex 100, designed for 100 nm sensitivity, maintains the same compact footprint while setting a new benchmark for ultraclean monitoring at larger channel sizes. Gamma Immunity Lighthouse’s advanced photodetector technology has reduced optical noise and minimized gamma-ray interference twentyfold, ensuring the detection of only true particle counts in your ultrapure water system. Count subtraction is not required because Lighthouse instruments achieve the lowest false count rates in the industry. Both Vertex 50 and Vertex 100 report counts in real time, without delay, providing reliable, immediate results. Early Detection and Fast Recovery Every Vertex 50 and Vertex 100 has been designed for rapid response. After a contamination event, each system returns to baseline levels within approximately 120 seconds, supporting early detection and quick recovery in critical water systems. Want to learn more about where gamma immunity and sensitivity meet? Contact your local Lighthouse representative today. - Vertex50 - Vertex100 Key Features: - Channel sizes: 50nm, 100nm, 150nm, 200nm - Four channels of simultaneous count data - 100 mL per minute flow rate - Built-in 3.5” color touch screen display - 316L stainless steel construction - Ethernet, RS485 Modbus Serial, 4-20mA - NEMA style enclosure - Integrated manual flow control - Interfaces with existing building automation and facility management systems Key Features: - Channel sizes: 100nm, 200nm, 300nm, 500nm - Two or Four channels of simultaneous count data - 100 mL per minute flow rate - Concentration Limit: >100,000 counts/mL @10% coincidence loss - Built-in 3.5” color touch screen display - Leak detection sensor - 316L stainless steel construction - Ethernet, RS485 Modbus Serial, 4-20mA - NEMA style enclosure - Integrated manual flow control Product Applications Semiconductor Manufacturing Instrument Files Operating Manual – Vertex50, Vertex100 Datasheet – Vertex50 Datasheet – Vertex100
Next Level Environmental Monitoring with the Apex Z™ Airborne Particle Counter Meet Apex Z: your ultimate partner in maintaining pristine cleanroom environments. This state-of-the-art airborne particle counter goes beyond simply measuring particles, giving you the confidence to manage your critical spaces with both precision and ease. With its advanced laser technology, intuitive 7-inch touchscreen, and rugged, chemically resistant enclosure, Apex Z delivers reliable results in even the most demanding settings. You'll move smoothly through your workflow thanks to features like hot-swappable batteries, flexible data views, and built-in compliance tools. Simplified Sampling Your data is only as good as your records. So Apex Z supports 21 CFR Part 11 compliance, with audit trails that log every action, user, and timestamp. You get multiple user and security levels, so only authorized folks can make changes. With storage for up to 10,000 samples, 2,500 locations, and 20,000 audit trail records, you'll never have to worry about running out of space or losing track of what happened when. Sampling should be simple, not stressful. The 7-inch multi-touch display puts all your data front and center, and the grid view makes it a breeze to see which locations have been sampled and which are up next. Color-coded indicators—green for done, blue for sampling, grey for to-do, orange for warnings, and red for alarms — help you keep track at a glance and avoid missed spots. Portable and Powerful At just over 7 pounds and with a compact footprint, Apex Z is easy to carry from room to room. It's the smallest, lightest, and quietest portable particle counter out there, so you can move fast without making a scene or breaking your back. No need to hover over the unit — just glance at the handle. Integrated status lights give you a 360-degree view of what's happening, even from across the room. You'll know instantly if everything's running smoothly or if something needs your attention. And you can forget about being tethered to a wall outlet. Apex Z comes with hot-swappable smart batteries that can run for up to 11 hours straight. Need more juice? Just pop in a fresh battery — no need to stop sampling. And if you're in a rush, you can charge up to 80% in just 90 minutes. You can even run the unit on a single battery while charging the other externally, so you're never left waiting around. A Sealed Suite of Diagnostics Apex Z isn't just another particle counter… it's built to keep you confident in your results day in and day out. Its self-diagnostics system is always running in the background, checking the laser's power, current, and supply, as well as monitoring airflow and sensor health. If anything's off, you'll know right away, long before it could impact your data. This means less downtime, fewer surprises, and more trust in your cleanroom monitoring. We know that cleanrooms are tough on equipment, but Apex Z is tougher. Its sealed enclosure is rated IP54 and is chemically compatible with all the main disinfectants – including VHP, so you can wipe it down as often as you need without worrying about damage. The rotating exhaust nozzle keeps things flexible, and the whole unit is built to handle the demands of pharmaceutical, semiconductor, and other high-stakes industries. ApexZ3 0.3 – 10.0μm Particle Size Range 1 CFM Flow Rate Key Features: - 0.3 – 10.0μm Particle Size Range - 1CFM Flow Rate - Bi-Directional Integration into LIMS EM Systems - Sealed Chemically Compatible Enclosure - Advanced Self-Diagnostics - Integrated Status Lights - Hot-Swappable Smart Batteries - Wi-Fi, Ethernet and USB Data Transfer Options - 21 CFR Part 11 Compliant - Customizable Data Reports - Built-In Cleanroom Certification Reports - 2 Year Warranty ApexZ50 0.5 - 25μm Particle Size Range 100 LFM Flow Rate Key Features: - 0.5-25um Particle Size Range - 100 LPM Flow Rate - Bi-Directional Integration into LIMS EM Systems - Sealed Chemically Compatible Enclosure - Advanced Self-Diagnostics - Integrated Status Lights - Hot-Swappable Smart Batteries - Wi-Fi, Ethernet and USB Data Transfer Options - 21 CFR Part 11 Compliant - Customizable Data Reports - Built-In Cleanroom Certification Reports - 2 Year Warranty
CATEGORY
48-Port System-In-a-Box System-In-a-Box is a pre-wired, pre-configured monitoring system built for cleanrooms and manufacturing. Traditional cleanroom monitoring systems take weeks, sometimes months, to design, wire, and validate. System-In-a-Box does it in a day. Mount it. Connect it. Monitor. That's the whole install. Key Features - 24 or 48 Ports with full sensor support - Fast installation: Pre-wired cabinets and pre-configured databases improve setup time - Built-in Compliance: 21 CFR Part 11-ready with software audit trails and validation templates - A single system to manage your monitoring - Log in via a browser to start/stop devices - Easily Managed alarms/events - Simple Creation of audit/event logs - 2-Year Warranty SIAB comes in two sizes, a 24-port Small Box and a 48-port Large Box, both with full sensor support, so you size it to your facility today and grow into it tomorrow. It runs on a wide power input range (100-240 VAC or 90-350 VDC), backed by a 2-year warranty, so it's built to keep running long after the install crew leaves. It runs on 100-240 VAC (50/60Hz, 6.1A) or 90-350 VDC (6.9A), so it fits most facility power configurations without special conditioning. IP20, built from 1.5mm galvanized steel with a matte black finish, so it holds up in a typical cleanroom or manufacturing environment. It runs on Windows 10 or Windows 11 compatible computers, or Windows Server 2019/2022. Google Chrome, Microsoft Edge, and Mozilla Firefox are supported. Apple Safari is optional in MVP. The control cabinet arrives pre-wired in an industrial steel enclosure, with the I/O list, cable schedule, and layout drawings already done. Mount your sensors, run one data cable to the PC, and you're live. LMSExpress 9 comes with the system, and it arrives with a pre-configured database. No extra software configuration is needed after install. Remote commissioning and support instructions are included with every system. A validation documentation package, protocols and templates, is available on request. Two years, standard warranty.
CATEGORY
24-Port System-In-a-Box System-In-a-Box is a pre-wired, pre-configured monitoring system built for cleanrooms and manufacturing. Traditional cleanroom monitoring systems take weeks, sometimes months, to design, wire, and validate. System-In-a-Box does it in a day. Mount it. Connect it. Monitor. That's the whole install. Key Features - 24 or 48 Ports with full sensor support - Fast installation: Pre-wired cabinets and pre-configured databases improve setup time - Built-in Compliance: 21 CFR Part 11-ready with software audit trails and validation templates - A single system to manage your monitoring - Log in via a browser to start/stop devices - Easily Managed alarms/events - Simple Creation of audit/event logs - 2-Year Warranty SIAB comes in two sizes, a 24-port Small Box and a 48-port Large Box, both with full sensor support, so you size it to your facility today and grow into it tomorrow. It runs on a wide power input range (100-240 VAC or 90-350 VDC), backed by a 2-year warranty, so it's built to keep running long after the install crew leaves. It runs on 100-240 VAC (50/60Hz, 6.1A) or 90-350 VDC (6.9A), so it fits most facility power configurations without special conditioning. IP20, built from 1.5mm galvanized steel with a matte black finish, so it holds up in a typical cleanroom or manufacturing environment. It runs on Windows 10 or Windows 11 compatible computers, or Windows Server 2019/2022. Google Chrome, Microsoft Edge, and Mozilla Firefox are supported. Apple Safari is optional in MVP. The control cabinet arrives pre-wired in an industrial steel enclosure, with the I/O list, cable schedule, and layout drawings already done. Mount your sensors, run one data cable to the PC, and you're live. LMSExpress 9 comes with the system, and it arrives with a pre-configured database. No extra software configuration is needed after install. Remote commissioning and support instructions are included with every system. A validation documentation package, protocols and templates, is available on request. Two years, standard warranty.
CATEGORY
System-In-a-Box is a pre-wired, pre-configured monitoring system built for cleanrooms and manufacturing. Traditional cleanroom monitoring systems take weeks, sometimes months, to design, wire, and validate. System-In-a-Box does it in a day. Mount it. Connect it. Monitor. That’s the whole install. 48-Port System-In-a-Box SIAB comes in two sizes, a 24-port Small Box and a 48-port Large Box, both with full sensor support, so you size it to your facility today and grow into it tomorrow. It runs on a wide power input range (100-240 VAC or 90-350 VDC), backed by a 2-year warranty, so it’s built to keep running long after the install crew leaves. Key Features - 24 or 48 Ports with full sensor support - Fast installation: Pre-wired cabinets and pre-configured databases improve setup time - Built-in Compliance: 21 CFR Part 11-ready with software audit trails and validation templates - A single system to manage your monitoring - Log in via a browser to start/stop devices - Easily Managed alarms/events - Simple Creation of audit/event logs - 2-Year Warranty You’ve got two options: the Small Box handles 24 ports, and the Large Box handles 48, both with full sensor support. Pick based on how many points you need to monitor now, and how much room you want for growth. It runs on 100-240 VAC (50/60Hz, 6.1A) or 90-350 VDC (6.9A), so it fits most facility power configurations without special conditioning. IP20, built from 1.5mm galvanized steel with a matte black finish, so it holds up in a typical cleanroom or manufacturing environment. It runs on Windows 10 or Windows 11 compatible computers, or Windows Server 2019/2022. If you’ve already got compliant infrastructure, you’re set. Remote commissioning and support instructions are included with every system, so help is there without waiting on a site visit.
CATEGORY
