top of page

ARTICLE

Changes in colour indicate deformations


A crack that is not visible from the outside forms and propagates inside the material. At the first sign of damage, it begins to fluoresce. @ ACS Appl. Mater. Interfaces

ETH Zurich researchers have developed a new type of laminate that changes color as soon as the material is deformed. This way, the materials researchers can kill two birds with one stone: a lightweight composite material that inspects itself.


Lightweight construction has found its way into many areas, especially automotive manufacturing, shipbuilding and aircraft construction. In addition to traditional lightweight metals such as aluminum, magnesium or titanium, load-bearing applications are increasingly featuring composite materials. This is driving a concurrent need to develop new techniques and methods for the early detection of damage to or even the possible failure of such as yet understudied materials.


Researchers from the Complex Materials Group at ETH Zurich, working in collaboration with researchers from the University of Fribourg, have now adopted an approach that has recently garnered attention in materials research: they have created a lightweight material that uses a color change to indicate internal deformation and thus possible material failure at an early stage. Composed of individual layers, their laminate is translucent, break-resistant and yet very lightweight.


Artificial mother-of-pearl combined with polymer


The laminate is composed of alternating layers of a plastic polymer and artificial nacre or mother-of-pearl. The latter is a speciality of the Complex Materials Laboratory and is modeled on the biological example of the mussel shell. It consists of countless glass platelets arranged in parallel, which are compacted, sintered and solidified using an polymeric resin. This makes it extremely hard and break-resistant.


The second layer consists of a polymer to which the researchers added an indicator molecule synthesized specifically for this application at the University of Fribourg. The molecule is activated as soon as the polymer experiences stretching forces, and this changes its fluorescence. The more the material stretches and the more of these molecules are activated, the more intense the fluorescence becomes.


Fluorescence indicates overstressed parts


"We used fluorescent molecules because you can measure the increase in fluorescence very well and you don't have to rely on subjective perception," says Tommaso Magrini, lead author of the study, which was recently published in the journal ACS Applied Materials and Interfaces. The system could also have been set up to produce a color change that would be directly perceptible from the outside. But: "The perception of colors is subjective and it is difficult to draw conclusions about changes in the material," Magrini says.


With the help of fluorescence, the researchers can now identify overstressed areas within the composite material even before fractures form. This allows early detection of vulnerable areas in a structure before catastrophic failure occurs. One possible application of the novel laminate is in components in the load-bearing structures found in buildings, aircraft or vehicles, where it is essential to detect their failure at an early stage.


However, it remains to be seen whether and how the material can be produced on an industrial scale. So far, it exists only at laboratory scale as a proof of concept. Reference Tough Bioinspired Composites That Self-Report Damage

Tommaso Magrini, Derek Kiebala, Dominique Grimm, Anna Nelson, Stephen Schrettl, Florian Bouville, Christoph Weder, and André R. Studart https://pubs.acs.org/doi/10.1021/acsami.1c05964

Comments


  • RSS

Subscribe to our monthly Newsletter

Get the nanotech news that matters directly in your inbox.

Thank you registering!

Follow us on social media

  • LinkedIn
  • X
  • Youtube
  • Tumblr
  • Facebook

Oct 2, 2024

Tokyo, Japan

International Conference on Powder Technology and Particle Science (ICPTPS 2024)

Oct 6, 2024

Pittsburgh, PA, USA

MS&T24

Oct 16, 2024

Brno, Czech Republic

Nanocon 2024

bottom of page