The SC10 is a high stability ovenized 10 MHz quartz oscillator that combines excellent phase noise, Allan variance, and aging characteristics. Using an SC-cut crystal for lowest phase noise characteristics, and an innovative "electronic double oven" temperature controller to minimize temperature gradients, the SC10 achieves a one second Allan variance of 2 ? 10-12 and an aging rate of only 2 ? 10-10, making it ideal for virtually any precision timing application.The SC10 is a high stability ovenized 10 MHz quartz oscillator that combines excellent phase noise, Allan variance, and aging characteristics. Using an SC-cut crystal for lowest phase noise characteristics, and an innovative "electronic double oven" temperature controller to minimize temperature gradients, the SC10 achieves a one second Allan variance of 2 ? 10-12 and an aging rate of only 2 ? 10-10, making it ideal for virtually any precision timing application.Features Specifications SC10 Ovenized Crystal Oscillator The SC10 is a high stability ovenized 10 MHz quartz oscillator that combines excellent phase noise, Allan variance, and aging characteristics. Using an SC-cut crystal for lowest phase noise characteristics, and an innovative "electronic double oven" temperature controller to minimize temperature gradients, the SC10 achieves a one second Allan variance of 2 ? 10-12 and an aging rate of only 2 ? 10-10, making it ideal for virtually any precision timing application. Convenient Options A number of options can be specified to match the SC10's performance to your requirements. +15 or +24 VDC operation can be specified, and the output is available on SMA, SMB, and SMC connectors, or on a single pin. Aging, noise, temperature stability, and operating temperature range can all be separately specified in one of three grades so you only pay for the performance you need. The electronic fine tuning (EFC) is available with a number of tuning ranges and slopes. Phone: (408)744-9040 ? Fax: (408)744-9049 ? email: info@thinkSRS.com ? www.thinkSRS.com SC10 Ovenized Crystal OscillatorSC10 Ovenized Crystal OscillatorSC10 Ovenized Crystal OscillatorSC10 Ovenized Crystal OscillatorSC10 Ovenized Crystal OscillatorSC10 Ovenized Crystal OscillatorSC10 Ovenized Crystal Oscillator Grade Dependent SpecificationsGrade Dependent SpecificationsGrade Dependent SpecificationsGrade Dependent Specifications J K A Frequency 10 MHz 10 MHz 10 MHz Aging (per day) Allan var. (1s) Phase noise (per Hz)Phase noise (per Hz)Phase noise (per Hz)Phase noise (per Hz) 10 Hz 100 Hz 1 kHz 10 kHz Temp. range (�C) 0 to 50 -10 to 60 -20 to 70 Temp. stability (0 to 50 �C) PowerPowerPowerPower Warm-up 8 W 8 W 12 W 25 �C 3 W 3 W 3 W OutputOutputOutputOutput Output level 1 Vrms into 50 � (+13 dBm) Output accuracy �5 % Output waveform Sine wave Harmonic distortion TuningTuningTuningTuning Mech. tuning range >�3 Hz EFC range and slope Option 1 0 to 10 V, 5 V nominal, +0.5 Hz/V Option 2 0 to 10 V, 5 V nominal, -0.5 Hz/V Option 3 -10 to 10 V, 0 V nominal, +0.25 Hz/V Option 4 -10 to 10 V, 0 V nominal, -0.25 Hz/V Option 5 -5 to 5 V, 0 V nominal, +0.5 Hz/V Option 6 -5 to 5 V, 0 V nominal, -0.5 Hz/V Option 7 0 to 6 V, 3 V nominal, +0.75 Hz/V Option 8 0 to 6 V, 3 V nominal, -0.75 Hz/V GeneralGeneralGeneralGeneral Output connector Pin, SMA, SMB, or SMC Supply voltage +15 VDC or +24 VDC Size 2" ? 2" ? 4" (WHL) Weight 1 lbs. Warranty One year parts and labor on defects in materials and workmanshipOne year parts and labor on defects in materials and workmanshipOne year parts and labor on defects in materials and workmanshipOne year parts and labor on defects in materials and workmanship 1. Low power warm-up option is available. Contact factory for details. 2. Lamp lifetime is the dominant consideration in the design life estimate. The estimate is based on the measured reduction of lamp intensity and the elevation of lamp start voltage with time.1. Low power warm-up option is available. Contact factory for details. 2. Lamp lifetime is the dominant consideration in the design life estimate. The estimate is based on the measured reduction of lamp intensity and the elevation of lamp start voltage with time.1. Low power warm-up option is available. Contact factory for details. 2. Lamp lifetime is the dominant consideration in the design life estimate. The estimate is based on the measured reduction of lamp intensity and the elevation of lamp start voltage with time.1. Low power warm-up option is available. Contact factory for details. 2. Lamp lifetime is the dominant consideration in the design life estimate. The estimate is based on the measured reduction of lamp intensity and the elevation of lamp start voltage with time. Phone: (408)744-9040 ? Fax: (408)744-9049 ? email: info@thinkSRS.com ? www.thinkSRS.com Phone: (408)744-9040 ? Fax: (408)744-9049 ? email: info@thinkSRS.com ? www.thinkSRS.com Phone: (408)744-9040 ? Fax: (408)744-9049 ? email: info@thinkSRS.com ? www.thinkSRS.com Phone: (408)744-9040 ? Fax: (408)744-9049 ? email: info@thinkSRS.com ? www.thinkSRS.com Phone: (408)744-9040 ? Fax: (408)744-9049 ? email: info@thinkSRS.com ? www.thinkSRS.com Phone: (408)744-9040 ? Fax: (408)744-9049 ? email: info@thinkSRS.com ? www.thinkSRS.com Phone: (408)744-9040 ? Fax: (408)744-9049 ? email: info@thinkSRS.com ? www.thinkSRS.com