NW
← Newsroom
Quantum TechAugust 3, 2019 · 2 min read

Novel graphene-matrix-assisted stabilization technique using unique 2D materials

Skolkovo Institute of Science and Technology (Skoltech)

2D copper oxide material inside the two-layer graphene matrix.@ Skoltech
2D copper oxide material inside the two-layer graphene matrix.@ Skoltech

Scientists from Russia and Japan found a way of stabilizing two-dimensional copper oxide (CuO) materials by using graphene. Along with being the main candidates for spintronics applications, these materials may be used in forthcoming quantum computers. The results of the study were published in The Journal of Physical Chemistry C.

The family of 2D materials has recently been joined by a new class, the monolayers of oxides and carbides of transition metals, which have been the subject of extensive theoretical and experimental research. These new materials are of great interest to scientists due to their unusual rectangular atomic structure and chemical and physical properties, and in particular, a unique 2D rectangular copper oxide cell which does not exist in crystalline (3D) form, as opposed to most of the 2D materials, whether well-known or discovered lately, which have a lattice similar to that of their crystalline (3D) counterparts. The main hindrance for practical use of monolayers is their low stability.

A group of scientists from MISiS, the Institute of Biochemical Physics of RAS (IBCP), Skoltech, and the National Institute for Materials Science in Japan (NIMS) discovered 2D copper oxide materials with an unusual crystal structure inside the two-layer graphene matrix using experimental methods.

"Finding that a rectangular-lattice copper-oxide monolayer can be stable under given conditions is as important as showing how the binding of copper oxide and a graphene nanopore and formation of a common boundary can lead to creation of a small stable 2D copper oxide cluster with a rectangular lattice. In contrast to the monolayer, the small copper oxide cluster's stability is driven to a large extent by the edge effects (boundaries) that lead to its distortion and, subsequently, destruction of the flat 2D structure. Moreover, we demonstrated that binding bilayered graphene with pure copper, which never exists in the form of a flat cluster, makes the 2D metal layer more stable," says Skoltech Senior Research Scientist Alexander Kvashnin.

The preferability of the copper oxide rectangular lattice forming in a bigraphene nanopore was confirmed by the calculations performed using the USPEX evolutionary algorithm developed by Professor at Skoltech and MIPT, Artem Oganov.

The studies of the physical properties of the stable 2D materials indicate that they are good candidates for spintronics applications.

Two-Dimensional CuO Inside the Supportive Bilayer Graphene Matrix

D. G. Kvashnin*A. G. KvashninE. Kano*A. HashimotoM. TakeguchiH. NaramotoS. SakaiP. B. Sorokin

J. Phys. Chem. C 2019, 123, 28, 17459-17465

DOI: 10.1021/acs.jpcc.9b05353

Contact information:

Alexander Kvashnin

Senior Research Scientist at Skoltech's Center for Energy Science and Technology

a.kvashnin@skoltech.ru

Artem Oganov

Professor at Skoltech and MIPT

a.oganov@skoltech.ru

Oganov Laboratory: Computational Materials Discovery Laboratory

More news

Quantum Tech5 days ago · 3 min read

Quantum systems never quite forget where they came from

A quantum "wave packet" (in the middle) launched from the same kind of starting point behaves differently. Even after bouncing around for a very long time, faint filament-like patterns (bright glow) are still visible, a tattoo tracing back to its early history. This lingering imprint is the "quantum birthmark" described in the study. Credit: Joonas Keski-Rahkonen, Tampere University Even the most chaotic quantum systems keep a permanent mark of their own past – a "quantum birthmark" – that...

Quantum TechOct 1 · 3 min read

Quantum communication: New method generates photons that are virtually indistinguishable

Illustration (University of Basel, Timon Baltisberger): Biexziton decay can generate photons of very high quality if the system is specifically controlled using an optical cavity. Under these conditions, 90 per cent of the photons are indistinguishable. Working in close collaboration, researchers from Paderborn University, the University of Basel and Ruhr University Bochum have made a significant breakthrough in the field of quantum communication. In their recently published paper in the...

Quantum TechSep 30 · 2 min read

Advancing quantum computing with zinc oxide quantum dots

(a) The structure of the gate electrodes on the ZnO device used in the experiment in this paper. (b) The charge stability diagram indicating the formation of ZnO double quantum dot in few-electron regime. Researchers at Tohoku University, in collaboration with the National Institute for Materials Science (NIMS) and the University of Tokyo, have taken an important step toward semiconductor quantum computing using zinc oxide (ZnO). The team successfully demonstrated charge sensing,...

Novel graphene-matrix-assisted stabilization technique using unique 2D materials — Nanotechnology World