NW

Particle & Dispersion Analysis

Particle size, zeta potential, and dispersion testing.

55 providers126 listings18 countries
← All services

Showing all 55 providers

Aerodyne Research Inc.Verified

Equipment & Instrumentation Manufacturers · 501–1,000 employees · United States

2 listed under this category

Aerosol Chemical Speciation Monitor

Measures mass loading and chemical composition of non-refractory aerosol particles in real-time. ACSM instruments use the same technology as our AMS series. Smaller, lower cost, more robust, and simpler to operate than our AMS instruments, the ACSM is designed for long-term unattended deployment and routine monitoring applications. There are three ACSM models available: quadrupole, time-of-flight, or time-of-flight with eXtended resolution. ACSM can be configured for either a PM 1 or a PM 2.5 lens, as well as a standard or a capture vaporizer. Each model provides mass concentrations of organics, sulfate, nitrate, chloride and ammonium with different limits of detection and time responses.

Aerodyne Mobile Laboratory

The Aerodyne Mobile Laboratory has a suite of instrumentation that changes depending on the requirements of the measurement campaign. Our experts in various fields are available to join your campaign. The mobile lab has traveled the globe conducting various types of research. In addition to our full size lab, we also have a smaller lab (minAML). Fenceline Monitoring & Leak Detection: Real-time detection and source identification of equipment leaks can be attained through mobile fenceline and on-site surveys. Pollution Heatmaps: Intensive mapping of industrial pollutant emissions has been used to characterize the the impact on downwind residential populations. Emission Rate Quantification: Using tracer release methods, the Aerodyne Mobile Laboratory quantifies oil and natural gas emissions across North America, from well pad to whole facility scale. Alternative Platforms: Aerodyne has installed suites of instruments aboard aircrafts and ships of various sizes. The Mobile Lab can be outfitted with an array of scientific instrumentation. Speak with our team about your specific measurement needs.

Arden PhotonicsVerified

Equipment & Instrumentation Manufacturers · 11–50 employees · United Kingdom

1 listed under this category

Multimode Launch Condition Control

Multimode launch condition controller ensures consistent and optimal launch conditions when testing or transmitting data over multimode fiber optic cables. Arden ModCon Mode Controller is a compact and lightweight module that will modify LED or VCSEL light source to provide repeatable EF compliant launch conditions.

Aveka IncVerified

Contract & Professional Service Providers · 201–500 employees · United States

3 listed under this category

Characterization Services

AVEKA’s Characterization Lab delivers comprehensive analytical testing services designed to evaluate the physical, chemical, and functional properties of powders, particle systems, dispersions, microcapsules, and complex materials. Our lab supports projects ranging from single-sample analyses to large multi-sample studies, helping customers better understand raw materials, optimize formulations, and verify finished product performance. With deep expertise in particle technology, analytical chemistry, and process engineering, our team selects the most appropriate test methods and provides clear data interpretation to help you make informed decisions. Standard turnaround time for most characterization requests is 2–3 days. Why Choose AVEKA for Material Characterization? - Full-service laboratory equipped for a wide range of particle and material analyses - Diverse capabilities across physical, chemical, thermal, and morphological testing - Fast, reliable sample turnaround - Competitive pricing - ISO 9001 certified, ensuring consistent quality and documentation AVEKA Advantage - Development-driven partners who tailor methods to customer needs - Robust data packages to support formulation, scale-up, and production decisions - Fast, dependable service with clear reporting - High-quality results produced by a skilled, experienced technical team Ready to Begin? Use our Characterization Request Form to submit materials for analysis. Our team will guide you through test selection, sample requirements, and reporting expectations. Particle Size Distribution - Horiba LB-500 - Horiba LA-950/960, LA-930, and LA-910 - Gilson Sonic AutoSiever - W.S. Tyler Ro-Tap Sieve Shaker - Microtrac Camsizer XT Dynamic Imaging Analyzer - Multisizer Coulter Counter 3 and 4e These methods help determine particle size distribution, shape, and uniformity—critical parameters for flowability, dispersion stability, and product performance. Particle Imaging - Microtrac Camsizer XT Dynamic Imaging Analyzer - Phenom Scanning Electron Microscope with EDS (Elemental Composition) - Leica Optical Microscope Microscopy provides high-resolution visualization of particle surfaces, morphology, coating quality, and structural defects. Thermal Analysis - Thermogravimetric Analyzer, TA Instruments Q500 - Differential Scanning Calorimeter, TA Instruments Q100 These techniques measure thermal transitions, moisture content, decomposition behavior, and chemical stability. Water Content - Loss-on-drying and solids analyzer, Arizona Computrac Max 4000XL - Metrohm 852 Titrando Karl Fischer Analyzer with a Metrohm 874 Oven - OHAUS and Mettler Toledo moisture analyzers Rheological Measurements - Freeman Technology FT4 Powder Rheometer - ATS RheoSystems STRESSTECH Constant Stress Rheometer System - Brookfield Viscometer These tools evaluate powder flowability, compressibility, shear properties, and flow performance under different conditions. Microbiology Testing - Sanitation Verification of Metal Surfaces, Neogen AccuPoint ATP Meter Additional Services - Zeta Potential, Colloidal Dynamics ZetaProbe - Specific Gravity and Density, Quantachrome Helium Pycnometer - High Performance Liquid Chromotography, HPLC - pH Analysis - Conductivity Testing - Bulk and Tap Density - BET Surface Area, Horiba SA-9650 MP3 Analyzer Factors to Consider - Is the material hazardous and require any precautions when handling? - Can the sample be used up during testing or must it remain intact? - Is particle settling or segregation possible during sampling? - What solvents provide proper dispersion and suspension for size analysis? - Do you require a specific ASTM method? - Are the particles nanometer-, micron- or millimeter-sized?

Particle Size Analysis

PARTICLE SIZE ANALYSIS - Particles 3nm to 2+ mm - Particle Size Distribution (PSD) - Sonic Sieve - Ro-Tap - Coulter Counter PARTICLE SIZE DISTRIBUTION - What is the size of our product? - What is the particle size and morphology exist after milling? HORIBA CAMSIZER - Are my particles multi-shaped? - Are my particles spherical?

Rheological Analysis

RHEOLOGICAL ANALYSIS - Does the viscosity of the ceramic slurry meet specifications? - Does the powder behave properly when gelled? - Can I make the surface of my active hydrophobic or more compatible with a resin? (with High Shear Mixing)

BioNanoNetVerified

Contract & Professional Service Providers · 11–50 employees · Austria

2 listed under this category

Optofluidic Force Induction (OF2i)

A novel technology for high sensitivity (nano) particle characterisation and manipulation on μ-fluidic chips for pharmaceutical and material research applications as well as medical diagnostics. Size, aspect ratio and aggregation behavior are one of the key factors affecting/defining the functionality of nanoparticles. Undefined and heterogenic particle populations demand for accurate analytic tools and advanced manipulation equipment to reduce unwanted side effects (and maximize desired effects). Since the discovery was made that photons can be used to manipulate particles (1), research efforts have focused on different applications using this approach (2, 3). The patent protected OF2i principle combines microfluidics and highly defined optical forces (Figure 1) to influence the fluidic motion of thousands of particles simultaneously, allowing sample-observation in real time and whole-sample scans. Through advanced motion evaluation, relevant particle parameters such as size, concentration, molecular weight and basic shape information (aspect ratio) can be derived. To exhibit the systems performance, protamin with CpG from Ovalbumin complexed proticles (vaccine) in the size range of 90 to 120nm were investigated. The sample was characterized via Dynamic Light Scattering (Malvern Zetasizer©) and Nano particle Tracking Analysis (Malvern NanoSight©) and subsequently analyzed through OF2i for aggregate determination and purification (Figure 2). Aggregates should be monitored, as they are inactive in vaccine solutions. Although DLS and NTA did hardly show any aggregates above 400nm, OF2i was able to detect 1.13% aggregates (from ~≥ 400nm up to 5μm) and effectively purify the samples in a fifth of the NTA scan duration. The OF2i technique can be used as a rapid analysis, characterisation and fine-tunable contactless filtration method of nanoscaled objects for statistically relevant online quality controls or routine lab tasks in pharmaceutical and medical diagnostics as well as in material research. Reference project: Project LightMatters

Nanoparticle Characterisation Using High Inductively Coupled Plasma Mass Spectrometry (ICPMS)

Inductively coupled plasma mass spectrometry (ICPMS) has already proven to be an elegant technique for the determination of metallic NPs. The major advantages of this technique is the selectivity, matrix tolerance, and wide dynamic range. Especially the compound independent quantification is of importance when real samples have to be analyzed. Single nanoparticle analysis by ICPMS is applicable for many metallic or metal containing nanoparticles. Modern instruments have short dwell times (< 100 μs) and therefore a high signal to noise ratio, which results in excellent detection limits. From the results, different features of the NPs (such as concentration, diameter, composition and size distribution) can be calculated. We have two single quadrupole ICPMS and one triple quadrupole ICPMS for these analysis. Especially triple quadrupole ICPMS can be used for detection of NPs that contain elements that a prone to spectroscopic interferences, such as sulfur or titanium. We have also developed chromatographic separation methods that allow the separation of the NPs from the ionic forms of an element. Together with the knowledge about the total concentration of an element the concentration of the NPs in a sample can be calculated. For this purpose, HPLC with different chromatographic conditions is employed to separate the NPs. The effluent of the chromatographic system is directly coupled to ICPMS which serves as an element-selective detector. Reference publications: (1) Hassellöv, Martin, et al. “Nanoparticle analysis and characterisation methodologies in environmental risk assessment of engineered nanoparticles.” Ecotoxicology 17.5 (2008): 344-361. (2) Fabricius, Anne-Lena, et al. “ICP-MS-based characterisation of inorganic nanoparticles—sample preparation and off-line fractionation strategies.” Analytical and bioanalytical chemistry 406.2 (2014): 467-479.

BioNavis LtdVerified

Equipment & Instrumentation Manufacturers · 11–50 employees · Finland

1 listed under this category

Extracellular Vesicle Characterization with MP-SPR

Characterization and interaction measurements of EVs are crucial parts of the research process. Extracellular vesicle size and concentration MP-SPR is an ideal tool for measuring EV size, especially for EVs smaller than 100nm due to high sensitivity of the technology. The unique multi-wavelength setup of MP-SPR, along with complete SPR curve measurements, are crucial features for size and concentration measurements. Extracellular Vesicle corona BioNavis MP-SPR measurements can be performed with complex media such as cell culture media, plasma or serum. Plasma proteins have been shown to interact with EVs, and MP-SPR has been used to study the interaction between vesicles and serum proteins forming protein corona. As the measurements are performed on dynamic flow, this allows the study of proteins forming hard and soft corona on EVs, samples can be obtained for further analysis. Affinity and kinetics MP-SPR measures the binding affinity of EVs with high precision and their diagnostic molecules (such as antibodies, peptides, or aptamers) without labels. The dynamic flow principle also provides binding kinetics. The derived kinetic measurements can be used to improve the diagnostic molecule interaction parameters. Cellular uptake MP-SPR allows you to either form a lipid bilayer on the SiO2 sensor surface to mimic the cellular interaction or culture adherent cells on suitable sensor surface. MP-SPR’s flexible sensor slide design allows the use of standard cell culture protocols to form a confluent cell layer on a sensor slide ex situ. Dynamic measurements can be used to observe the uptake of extracellular vesicles in living cells. This unique capability, enabled by the complete SPR curve measurement of MP-SPR, provides new insights into EV uptake. Additionally, after real-time MP-SPR measurements, the sensor slide can be further validated ex situ with microscopy techniques, including AFM and SEM.

BL NanobiomedVerified

Contract & Professional Service Providers · 1–10 employees · Greece

1 listed under this category

Dynamic Light Scattering (DLS)

Our specialized Dynamic Light Scattering (DLS) techniques, provide a non-invasive way to understand the size distribution and movement of nanoparticles in suspension. This plays a crucial role in nanotechnology and colloidal science, helping advance drug delivery, nanocomposites, and various nanoscale applications.

California Nanotechnologies CorporationVerified

Contract & Professional Service Providers · 11–50 employees · United States

1 listed under this category

Particle Size Analysis

Particle size analysis (PSA) stands out as one of the most important analytical techniques. Whether developing advanced ceramics, engineering battery materials, manufacturing semiconductor components, or producing next-generation aerospace alloys, accurately measuring particle size is fundamental to achieving consistent performance and reliable results. Particle size analysis is far more than a quality control measurement. It is a critical decision-making tool that influences nearly every stage of nanomaterial development, from initial powder synthesis to final product validation. Particle size analysis provides this critical information by measuring not only the average particle diameter but also the overall particle size distribution. Particle size analysis serves as the primary monitoring tool throughout the cryomilling process. By regularly measuring particle size distributions, engineers can determine when the desired particle refinement has been achieved while simultaneously monitoring powder uniformity and identifying potential processing issues. Particle size analysis therefore plays an important role before, during, and after SPS processing. Engineers characterize incoming powders to ensure they meet required specifications, then evaluate the resulting microstructures after sintering to understand how particle size influenced grain growth and final density.

CIC nanoGUNEVerified

Academic & Research Institutions · 51–200 employees · Spain

1 listed under this category

Microplastics monitorization

By machine learning-assisted multispectroscopic approaches, we are developing technology for the detection, classification, and quantification of nano/microplastics. The topic is of great relevance for drinking water, food, and environmental issues in general. Moreover, this topic has strong impact on future political and economic strategies and particularly on global health. We built up spectroscopic instrumentation, large data bases of typical plastics in the environment, and software packages for data analysis. We are looking for strategic investors or corporate venture capital firms that are ready to invest, direct and guide by consultancy future R&D activities. Further, we are interested in collaborations with food industry to address specific needs.

CPS Instruments, Inc.Verified

Equipment & Instrumentation Manufacturers · 1–10 employees · United States

1 listed under this category

Particle size analysis

CPS Instruments furthers research and innovation across multiple industries through cutting-edge solutions in particle analysis. Industries that rely on accurate particle analysis, rely on CPS Instruments' state-of-the-art disc centrifuges. CPS provides worldwide solutions. CPS Instruments' reputation for innovation and reliable results has allowed us to reach industries on a global scale.

Dekati Ltd.Verified

Equipment & Instrumentation Manufacturers · 11–50 employees · Finland

1 listed under this category

Fine particle measurement solutions

Dekati Ltd. has designed and manufactured high quality instrumentation for fine particle measurements successfully for more than 30 years. Our measurement solutions include complete fine particle conditioning and measurement setups for <10 µm particles. Dekati Ltd. is a world leader in designing and manufacturing innovative fine particle measurement solutions. We have over 30 years of experience in providing measurement instruments and complete measurement solutions to a wide variety of environments and sample conditions. We take pride in the quality and robustness of our products and are committed to finding the best possible solution for your aerosol measurement needs, even when you need to research ultra fine particles. Our experience and expertise in aerosol measurement applications is at your disposal throughout the lifecycle of your investment via our global partner network.

‹…