Nanoindentation and thermal/electrical/optical testing.
Showing all 6 providers
Equipment & Instrumentation Manufacturers · 11–50 employees · United States
1 listed under this category
Four Point Probe
This instrument allows for sheet resistance and conductivity measurements on non-insulating films. Samples up to 6” can be measured, and the system software corrects for sample geometry. Both soft- and sharp-tipped probes are available.
Compiled from http://www.ajaint.com
Equipment & Instrumentation Manufacturers · 11–50 employees · United States
3 listed under this category
Manipulation and Biasing of Low Dimensional Materials
Probe targeted regions of low-dimensional materials to correlate electrical behavior with nanoscale structural evolution. With Hummingbird you can: Precisely probe and bias targeted regions of low-dimensional materials using the Hummingbird Scientific biasing manipulator sample holders.
2D materials-based electronic devices
Correlate electrical transport with nanoscale structural evolution in operating 2D materials-based devices. With Hummingbird you can: Perform operando testing and imaging of 2D materials-based devices using Hummingbird Scientific electrical biasing sample holders.
2D material at high temperatures
Observe phase transformations, structural evolution, and thermal stability of 2D materials at elevated temperatures. With Hummingbird you can: Observe 2D materials behavior at elevated temperatures using Hummingbird Scientific MEMS heating + biasing sample holders.
Compiled from http://hummingbirdscientific.com
Nanomaterial & Chemical Producers · 11–50 employees · Italy
1 listed under this category
Mechanical Testing
MBN provides a comprehensive suite of mechanical tests to assess the performance of materials and components. These include: Microhardness testing, applicable both to bulk samples and polished cross-sections of powders, to evaluate local hardness and phase distribution. Macrohardness measurements for overall resistance to localized plastic deformation. Charpy impact testing to assess toughness and resistance to brittle fracture. Tensile testing to determine yield strength, ultimate tensile strength, and ductility. These tests support the qualification and optimization of consolidated specimens for structural and functional applications.
Compiled from http://www.mbn.it
Government & National Laboratories · 51–200 employees · Botswana
4 listed under this category
Material Thermal Analysis
Differential Thermal Analysis (DTA) Thermal stability of materials Thermal Decomposition Analysis Determining melting points, boiling points, and other phase changes Differential Scanning Calorimetry (DSC) Identify glass transitions (Tg), melting points (Tm), and crystallisation temperatures (Tc) Analysing drug stability, polymorphism
Oil & Fuel Analysis
Oil base condition/quality monitoring Oil properties analysis Machine wear by elemental analysis Oil contamination by (water, coolant, fuel, soot) Oil degradation (viscosity, oxidation, nitration, TAN) Fuel integrity
Thermal & Chemical Analysis
Differential Thermal Analysis (DTA): Thermal stability, decomposition, phase changes. Differential Scanning Calorimetry (DSC): Glass transitions (Tg), melting points (Tm), crystallisation (Tc). Drug stability and polymorphism analysis.
Materials Analysis, Testing & Characterization
We provide timely, high-precision materials testing and analysis for research, industry, and academia — including tensile strength, metal quality, abrasion resistance, and more.
Compiled from http://bitri.co.bw
Contract & Professional Service Providers · 11–50 employees · United States
1 listed under this category
Visual Metrology Device
Cybernet has built and delivered a visual metrology device that is capable of high-precision measurement of small arms ammunition.
Compiled from http://cybernet.com
Contract & Professional Service Providers · 501–1,000 employees · United States
8 listed under this category
Ride Quality Measurement System (RQMS)
The Ride Quality Measurement System (RQMS) operates similar to the Vehicle/Track Interaction (V/TI) Monitor, but has the advantage that it is synchronized with other measurement systems. When the RQMS is installed on a revenue vehicle with other systems, such as a Track Geometry Measurement System (TGMS), it provides invaluable insights to understand what track geometry conditions are driving undesired vehicle/track interaction conditions.
Field Instrumentation Testing
ENSCO provides industry-leading field instrumentation services for Site Acceptance Testing of new rolling stock, infrastructure assessments, and research investigations to understand component performance.Testing equipment includes our Instrumented Wheel Sets (IWS) and Instrumented Couplers.
Fleet Monitoring
KLD's fleet monitoring technology was designed to provide the essential information needed to make decisions on safety and efficiency. Our rolling stock inspection technology capabilities include wheel profile management, brake assessment, truck/bogie evaluation, and coupler inspection.
Deployable Gage Restraint Measurement System (DGRMS)
Gage (gauge) widening can be caused by many factors including tie and fastener condition that result in the rails moving laterally or rotating due to rail cant. The Deployable Gage Restraint Measurement System (DGRMS) is applies known vertical and lateral loads into the rails to simulate real-life loads into the track allowing for gage to be measured under load. Additionally, the DGRMS measures gage away from the load allowing for additional useful calculations to assess the tie and fasteners’ ability to hold gage.
Track Geometry Measurement System (TGMS)
The Track Geometry Measurement System (TGMS) is the fundamental system to directly measure all the key track geometry conditions such as gage (gauge), curvature, crosslevel, warp, twist, profile (surface, top), and alignment. Its measurements replace the manual measurements made by field personnel.
Vehicle/Track Interaction (V/TI) Monitor
Many track geometry conditions combine multiple factors to cause a derailment risk. The Vehicle/Track Interaction (V/TI)Monitor uses the actual rail vehicle response to the track to assess the track condition. The V/TI operates autonomously and is a great addition to the Track Geometry Measurement System (TGMS) to ensure complete track geometry condition assessment. Since the V/TI operates autonomously, it can find rapidly changing conditions.
Rail Component Imaging System (RCIS)
Similar to the Track Component Imaging System (TCIS), the Rail Component Imaging System (RCIS) provides high resolution machine vision imagery of the fasteners and tie portion near the fasteners. The RCIS provides a cost effective method to automatically inspect fasteners and the critical portion of the ties near the fasteners, while also performing a thorough inspection of the rail surface.
Vehicle Acceptance Testing
ENSCO's experienced team and advanced test equipment provide data collection and analysis services for vehicle approval, also known as Site Acceptance Testing (SAT). ENSCO verifies system specifications and confirms safe operations. ENSCO’s vehicle acceptance instrumentation capabilities include: * Wheel/rail force measuring using our Instrumented Wheel Sets (IWS) * Vibration and ride quality testing * Wayside and onboard noise monitoring * Wheel unloading and load equalization measurement * Brake performance testing * Wheel temperature testing * Suspension performance evaluations
Compiled from http://ensco.com
