park_nano_research_grant.jpg

New metasurface laser produces world's first super-chiral light


An artistic impression of the metasurface laser to produce super-chiral twisted light with OAM up to 100. @ Wits University

Researchers have demonstrated the world's first metasurface laser that produces "super-chiral light": light with ultra-high angular momentum. The light from this laser can be used as a type of "optical spanner" to or for encoding information in optical communications. "Because light can carry angular momentum, it means that this can be transferred to matter. The more angular momentum light carries, the more it can transfer. So you can think of light as an 'optical spanner'," Professor Andrew Forbes from the School of Physics at the University of the Witwatersrand (Wits) in Johannesburg, South Africa, who led the research. "Instead of using a physical spanner to twist things (like screwing nuts), you can now shine light on the nut and it will tighten itself." The new laser produces a new high purity "twisted light" not observed from lasers before, including the highest angular momentum reported from a laser. Simultaneously the researchers developed a nano-structured metasurface that has the largest phase gradient ever produced and allows for high power operation in a compact design. The implication is a world-first laser for producing exotic states of twisted structured light, on demand. Nature Photonics today published online the research that was done as a collaboration between Wits and the Council for Scientific and Industrial Research (CSIR) in South Africa, Harvard University (USA), the National University of Singapore (Singapore), Vrije Universiteit Brussel (Belgium) and CNST - Fondazione Istituto Italiano di Tecnologia Via Giovanni Pascoli (Italy). In their paper titled: High-purity orbital angular momentum states from a visible metasurface laser, the researchers demonstrate a new laser to produce any desired chiral state of light, with full control over both angular momentum (AM) components of light, the spin (polarisation) and orbital angular momentum (OAM) of light. The laser design is made possible by the complete control offered by new nanometer-sized (1000 times smaller than the width of a human hair) metasurface - designed by the Harvard group - within the laser. The metasurface is made up of many tiny rods of nanomaterial, which alters the light as it passes through. The light passes through the metasurface many times, receiving a new twist everytime it does so. "What makes it special is that to the light, the material has properties impossible to find in Nature, and so is called a "metamaterial" - a make-believe material. Because the structures were so small they appear only on the surface to make a metasurface." The result is the generation of new forms of chiral light not observed from lasers until now, and complete control of light's chirality at the source, closing an open challenge. "There is a strong drive at the moment to try and control chiral matter with twisted light, and for this to work you need light with a very high twist: super-chiral light," says Forbes. Various industries and research fields require super-chiral light to improve their processes, including the food, computer and biomedical industries. "We can use this type of light to drive gears optically where physical mechanical systems would not work, such as in micro-fluidic systems to drive flow," says Forbes. "Using this example, the goal is to perform medicine on a chip rather than in a large lab, and is popularly called Lab-on-a-Chip. Because everything is small, light is used for the control: to move things around and sort things, such as good and bad cells. Twisted light is used to drive micro-gears to get the flow going, and to mimic centrifuges with light." The chiral challenge "Chirality" is a term often used in chemistry to describe compounds that are found as mirror images of one another. These compounds have a "handedness" and can be thought of as either left- or right-handed. For example, lemon and orange flavours are the same chemical compound, but only differ in their "handedness". Light is also is chiral but has two forms: the spin (polarization) and the OAM. Spin AM is similar to planets spinning around their own axis, while OAM is similar to planets orbiting the Sun. "Controlling light's chirality at the source is a challenging task and highly topical because of the many applications that require it, from optical control of chiral matter, to metrology, to communications," says Forbes. "Complete chiral control implies control of the full angular momentum of light, polarisation and OAM." Because of design restrictions and implementation impediments, only a very small subset of chiral states has been produced to date. Ingenious schemes have been devised to control the helicity (the combination of spin and linear motion) of OAM beams but they too remain restricted to this symmetric set of modes. It was not possible to write down some desired chiral state of light and have a laser produce it, until now. Metasurface laser The laser used a metasurface to imbue light with ultra-high angular momentum, giving it an unprecedented "twist" in its phase while also controlling the polarisation. By arbitrary angular momentum control, the standard spin-orbit symmetry could be broke, for the first laser to produce full angular momentum control of light at the source. The metasurface was built from carefully crafted nanostructures to produce the desired effect, and is the most extreme OAM structure so far fabricated, with the highest phase gradient yet reported. The nanometre resolution of the metasurface made possible a high-quality vortex with low loss and a high damage threshold, making the laser possible. The result was a laser that could lase on OAM states of 10 and 100 simultaneously for the highest reported AM from a laser to date. In the special case that the metasurface is set to produce symmetric states, the laser then produces all prior OAM states reported from custom structured light lasers. Going forward "What we find particularly exciting is that our approach lends itself to many laser architectures. For instance, we could increase the gain volume and metasurface size to produce a bulk laser for high-power, or we could shrink the system down onto a chip using a monolithic metasurface design," says Forbes. "In both cases the lasing mode would be controlled by the pump's polarisation, requiring no intra-cavity elements other than the metasurface itself. Our work represents an important step towards merging the research in bulk lasers with that of on-chip devices." High-purity orbital angular momentum states from a visible metasurface laser Hend Sroor, Yao-Wei Huang, Bereneice Sephton, Darryl Naidoo, Adam Vallés, Vincent Ginis, Cheng-Wei Qiu, Antonio Ambrosio, Federico Capasso, Andrew Forbes Nature Photonics (2020) DOI: 10.1038/s41566-020-0623-z Contact information: Andrew Forbes Wits Professor of Physics Andrew.Forbes@wits.ac.za Phone: 0117176885 University of the Witwatersrand (Wits)

 

STAY CURRENT WITH THE NWA NEWSLETTER DELIVERED TO YOUR INBOX.

FOUNDING MEMBERS

May the force be with you: detecting ultrafast light by its force

Using viscous metals in micro fibers

Sharing a secret... the quantum way

Manipulating non-magnetic atoms in a chromium halide enables tuning of magnetic properties

Tailored light inspired by nature

Novel approach improves graphene-based supercapacitors

Metal-Breathing Bacteria Could Transform Electronics, Biosensors, and More