Researchers develop a plant-based thermotherapy patch

Researchers developed this thermal patch using plant material

A team of researchers at Tampere University, Finland, has developed a biodegradable, transparent, flexible and fast-acting thermotherapy patch from plant leaves. The patch is compatible with flexible electronic applications. Plant material was used to reduce the amount of electronic waste.

The researchers used leaves from a Bodhi tree (Ficus religiosa). The veins of the leaves have a fractal pattern that makes the surface highly flexible and shearable. Silver nanowires were attached to the leaf skeleton, and the surface was encapsulated in a biodegradable transparent tape.

The fractal-based design can also be used in flexible electronic applications, as it overcomes the limitations of conventional planar designs by maximizing the surface area at the microscale, or more specifically, maximizing the surface area to volume ratio via simple scaling. The large surface area enables effective heat transfer, allowing a rapid response time and preventing overheating. Due to the flexibile structure and uniform heating of the patch, it can also be attached to moving joints.

In orthopedics, medical thermotherapy pads are commonly used to reduce pain, improve blood circulation and decrease inflammation. They are also used in the treatment of arthritis, stiff joints, cervical spondylosis and physical injuries.

Traditional thermotherapy pads are known to have caused burns—one reason being that some people have skin not very sensitive to heat. Part of the problem is that commercial heating pads are opaque, and users cannot see how their skin is reacting to the therapy.

As the thermotherapy patch is made entirely of plant-based materials, it can help reduce carbon footprints and electronic waste. All the materials used in the fabrication process are eco-friendly, economical, easily accessible and easy to fabricate.

"Electronc waste is a growing environmental problem worldwide. The use of biotic architectures and materials can help in the design of next-generation flexible electronic devices while also addressing e-waste problems," says Vipul Sharma, postdoctoral researcher appointed by the Academy of Finland.

Sharma works in the Bioinspired Materials and Robotics group, which is part of the BioMediTech institute of the Faculty of Medicine and Health Technology at Tampere University. The group is headed by Academy Research Fellow Veikko Sariola.

Electronics, especially flexible electronics, are increasingly integrated into medical devices, textiles, wellness trackers and other portable devices, among other things.

The concept can also be applied in various applications such as defogging/defrosting, wearable devices, industrial heat systems, sensors, thermochromic displays and microfluidic chips.


Flexible biodegradable transparent heaters based on fractal-like leaf skeletons

Vipul Sharma, Anastasia Koivikko, Kyriacos Yiannacou, Kimmo Lahtonen & Veikko Sariola

DOI: 10.1038/s41528-020-00091-8


Veikko Sariola

Academy Research Fellow Faculty of Medicine and Health Technology

Tampere University

Tampere University




Lighting the way to selective membrane imaging

Novel magnetic spray transforms objects into millirobots for biomedical applications

A DNA-based nanogel for targeted chemotherapy

A pressure sensor at your fingertips

A filter for environmental remediation

Predicting forces between oddly shaped nanoparticles

One-way street for electrons