Researchers from the Moscow Institute of Physics and Technology have proposed a method that speeds up the calculation of nanobubble diffusion in solid materials. This method makes it possible to create significantly more accurate fuel models for nuclear power plants. The paper was published in the Journal of Nuclear Materials.
Why does nuclear fuel 'age'?
During the reactor operation, fission fragments, flying at high speeds through the crystal lattice of the nuclear fuel material, create various defects -- vacancies, interstitial atoms, and their clusters. Combining, such vacancies form bubbles that fill up with fission gas products during fuel burnout. The diffusion of such nanobubbles significantly affects the properties of the fuel and the release of gaseous fission products from it.
Modeling to the rescue
Fuel aging processes are hard to research in an experimental fashion. On the one hand, such processes are very slow, and on the other hand, gathering experimental data during the reactor operation is almost impossible. Therefore, integrated models are currently being developed to allow calculating the evolution of fuel material properties during the burnout process. The nanobubble diffusion coefficient is one of the key parameters in such models. This study is a joint project of MIPT and the Joint Institute for High Temperatures of the Russian Academy of Sciences.
From Schrödinger equation to dynamics of hundreds of thousands of atoms
The researchers from the Laboratory of Supercomputer Methods in Condensed Matter Physics at MIPT examined atomistic models of the material comprising hundreds of thousands of atoms. Using supercomputers, the team calculated their trajectories over hundreds of millions or even billions of integration steps. The gamma uranium interatomic interaction model used was obtained by the physicists in the course of their previous work, based on resolving the quantum mechanical problem for a multielectron system.
MIPT doctoral student Alexander Antropov, a co-author of the paper, explained: "For the nanobubble to move, it is necessary for the lattice atoms to cross over to the other side of the bubble. This is similar to an air bubble moving in water. However, in solid materials, this process is much slower. When working on the project, we demonstrated that there is another difference: The pores in the lattice take the form of polyhedra and the stable faces inhibit the diffusion process. In the 1970s, the possibility of such an effect was predicted theoretically based on general considerations. Our method makes it possible to obtain quantitative results for a specific material."
"Due to the fact that the diffusion of nanobubbles is very slow, the only real way to model their movement is to somehow give them a push. The problem, however, is how do you push a void? While working on the project, we proposed and established a method, in which an external force acts on the material surrounding the nanopore. The bubble begins to float upwards, similarly to a bubble in water under the buoyant force of Archimedes' principle. The proposed method is based on the Einstein-Smoluchowski relation and makes diffusion coefficient calculations dozens of times faster. In the future, we plan to use it for other materials that are exposed to severe radiation damage in nuclear reactors," commented Vladimir Stegailov, MIPT professor, the head of the MIPT Laboratory of Supercomputer Methods in Condensed Matter Physics.
Nanobubbles diffusion in bcc uranium: Theory and atomistic modelling
Alexander Antropov & Vladimir Stegailov
Journal of Nuclear Materials (2020) Volume 533, 152110
DOI: 10.1016/j.jnucmat.2020.152110
Contact information:
Vladimir Stegailov
MIPT professor
v.stegailov@hse.ru | stegailov@gmail.com
+7 (495) 916 8876 | +7 (495) 772-9590
Laboratory of Supercomputer Methods in Condensed Matter Physic
Moscow Institute of Physics and Technology (MIPT)
Researchers at Science Tokyo have shown that the circular photogalvanic effect in two-dimensional organic-inorganic hybrid perovskites arises from the crystal bulk rather than its surface. Using circularly polarized light at normal incidence, they found helicity-dependent photocurrents that reversed with light handedness and with crystal polarity in chiral enantiomers. The lead iodide layers provide strong spin-orbit coupling while molecular cations set bulk polarity.
Two new studies catalog nearly 9,000 two-dimensional materials and identify 61 semimetals and 1,568 insulators suited to twistronics, the stacking and rotating of atomically thin layers to engineer narrow electronic bands. The work maps topological electronic structures, predicts promising twisted bilayers such as tin diselenide and hafnium disulfide, and confirms several candidates can be grown in bulk and exfoliated into working devices, giving researchers a systematic route to designer…
Researchers at the University of Osaka have directly observed a heavy-fermion state forming at the interface between a one-atom-thick ytterbium-copper (YbCu₂) layer and a copper crystal, using intense synchrotron light to probe electron behavior. They identified two distinct states, one confined to the two-dimensional layer and another extending into the three-dimensional substrate, arising from hybridization between localized Yb 4f and mobile conduction electrons.
